Effective May 2016 Technical Data 10347 Supersedes April 2015 FPV1507 Dual conductor high current power inductor Applications Multi-phase power supplies Compatible with Picor Cool-Power ZVS Buck-Boost Regulator Family (Picor part number series PI37xx) Environmental Data Storage temperature range (component): -55 C to +125 C Operating temperature range: -55 C to +125 C (ambient plus self-temperature rise) Solder reflow temperature: J-STD-020D compliant Description HALOGEN Dual conductor, two-turn construction HF Pb FREE Magnetically shielded Picor and Cool-Power are trademarks of Vicor Corporation. 15.1 mm x 8.6 mm footprint surface mount package in a 6.6 mm height Ferrite core material Halogen free, lead free, RoHS compliantFPV1507 Technical Data 10347 Effective May 2016 Dual conductor high current power inductor Product Specifications 1 2 3 4 OCL I I DCR (m ) Q minimum rms sat 5 Part Number (nH) 10% (A) (A) 20C reference only FPV1507-500-R 500 20 40 1.15 0.173 135 FPV1507-650-R 650 20 31 1.15 0.173 135 1. Open Circuit Inductance (OCL) Test Parameters: 1.0 MHz, 0.1 Vrms, 0.0 Adc, +25 C (Pins 1-3, short 2-4) 4. DCR measured from Pins (1-2) and (3-4) 2. I : DC current for an approximate temperature rise of 40 C without core loss. Derating is necessary for AC currents. 5. Part Number Definition: FPV1507-xxx-R rms PCB layout, trace thickness and width, air-flow, and proximity of other heat generating components will affect the FPV1507 = Product code and size temperature rise. It is recommended that the temperature of the part not exceed 125 C under worst case operating xxx= Inductance value in nH, conditions verified in the end application. -R suffix = RoHS compliant 3. I : Peak current for approximately 2% rolloff +25 C 6. Q test parameters: 1 MHz, 0.1 V , +25 C, (Pins 1-3, short 2-4) sat rms Note: Hipot: 200 Vdc minimum for 2 seconds, 0.1 mA pins (1-2) to (4-3) Dimensions (mm) Recommended Pad Layout Schematic 14.6 10.1 14.6 0.5 0.5 1 4 1.4 2.60 0.50 1.15 0.56 0.1 4 3 4 FPV1507-XXX 8.3 3 3.30 0.3 wwllyy R 1 2 1 2 2 3 0.7 0.2 2.60 2.3 6.3 0.3 Resist area 0.30 A B DCR measured from point A to point B Part marking: FPV1507-XXX (XXX= inductance value in nH), wwllyy=date code, R=revision level Soldering surfaces to be coplanar within 0.1 millimeters Pins 2 & 4 are connected through the PCB trace www.eaton.com/elx 2