Effective October 2015 Technical Data 4120 Supersedes March 2007 HC8 High current power inductors Applications Multi-phase regulators Voltage Regulator Modules (VRMs) Distributed power systems DC-DC converters Desktop and server VRMs and EVRDs Point-of-Load (POL) modules Field Programmable Gate Array (FPGA) DC-DC converters Battery power systems High current power supplies Data networking and storage systems Product description Environmental data Surface mount inductors, 4.0mm height, Storage temperature range (component): designed for higher speed switch mode applica- -40C to +155C tions requiring low voltage and high current Operating temperature range: -40C to +155C Design utilizes high temperature powder iron (ambient plus self-temperature rise) material with a non-organic binder to eliminate Solder reflow temperature: thermal aging J-STD-020D compliant Inductance Range from 0.175 uH to 47.3 uH Current Range from 2.2 to 76 Amps Frequency Range 1kHz to 500kHz PbHC8 Technical Data 4120 Effective October 2015 High current power inductors Product specifications 3 4 5 l (amps) l (amps) DCR (m ) Volt-sec sat sat 6 1 2 Part number OCL (H) 20% l (amps) 15% 30% maximum 20C (V-s) rolloff rolloff rms HC8-R15-R 0.175 39.0 43 76 0.80 1.5 HC8-R39-R 0.390 28.3 26 45 1.55 2.5 HC8-R75-R 0.766 18.8 18.5 32.7 3.40 3.5 HC8-1R2-R 1.32 16.0 14.4 25.5 4.70 4.5 HC8-1R9-R 1.90 12.4 11.8 20.9 7.7 5.5 HC8-2R6-R 2.65 10.2 10.0 17.7 11.4 6.5 HC8-3R5-R 3.52 8.5 8.7 15.3 16.5 7.5 HC8-4R5-R 4.52 8.0 7.7 13.5 18.6 8.5 HC8-5R6-R 5.65 6.7 6.9 12.1 26.3 9.5 HC8-6R9-R 6.90 6.4 6.2 10.9 28.9 10.5 HC8-8R2-R 8.27 5.5 5.7 10.0 39.6 11.5 HC8-100-R 9.77 5.2 5.2 9.2 43.6 12.5 HC8-150-R 15.02 4.1 4.2 7.4 68.6 15.5 HC8-220-R 21.40 3.4 3.5 6.2 99.5 18.6 HC8-330-R 31.65 2.7 2.9 5.1 154 22.6 HC8-470-R 47.28 2.2 2.4 4.2 237 27.6 1. Open Circuit Inductance (OCL) Test Parameters: 100kHz, 1.0Vrms, 0.0Adc, +25C 5. Applied Volt-Time product (V-s) across the inductor. This value represents the applied V-s at 2. Irms: DC current for an approximately T of 40C without core loss. Derating is necessary for operating frequency necessary to generate additional core loss which contributes to the 40C AC currents. Pad layout, trace thickness and width, airflow, and proximity of other heat generating temperature rise. De-rating of the Irms is required to prevent excessive temperature rise. The 100% components will affect the temperature rise. It is recommended that the temperature of the part V-s rating is equivalent to a ripple current I of 20% of Isat (30% rolloff option). p-p not exceed 155C under worst case conditions verified in the end application. 6. Part number definition: HC8-XXX-R 3. Peak current for approximately 15% rolloff +20C HC8 = Product code and size 4. Peak current for approximately 30% rolloff +20C XXX = Inductance value in uH. R = Decimal point. If no R is present then last character equals number of zeros -R suffix indicates RoHS compliant Dimensionsmm FRONT VIEW FRONTVIEW TOP VIEW TABLE RECOMMENDED PAD LAYOUT C SIDE VIEW L A SCHEMATIC PN mm 3.5 typ 1 2plcs R15 2.1 2.70 0.55 10.9 HC8-XXX 10.4 4.0 (2x) Max Max R39 2.1 Max wwllyy R 3.0 typ R75 2.1 2plcs 1R 2.1 Aref 1R9 3.95 2 10.4 thru 2.7 2 plcs 4.0 typ Max 470 ref Part marking: HC8= (Product code and size)-xxx=(inductance value in uH, R= decimal point. If no R is present then last character equals number of zeros. wwlyly=date code, R=revision level Tolerances are 0.2 millimeters unless stated otherwise All soldering surfaces to be coplanar within 0.1 millimeters Do not route traces or vias underneath the inductor Packaging informationmm Supplied in tape and reel packaging, 800 parts per reel 4.0 1.5 dia 2.0 +0.1/-0.0 1.5 dia min A 1.75 11.5 Ao=10.4 mm Bo=11.2 mm 24.0 HC8-XXX +/-0.3 11.2 Bo Ko=4.3 mm wwllyyR Ko A SECTION A-A 16.0 Ao User direction of feed www.eaton.com/elx 2