Effective December 2015 Technical Data DS4312 Supersedes December 2007 HC9 High current power inductors Applications Multi-phase regulators Voltage Regulator Modules (VRMs) Distributed power systems DC-DC converters Desktop and server VRMs and EVRDs Point-of-Load (POL) modules Field Programmable Gate Array (FPGA) DC-DC converters Battery power systems High current power supplies Data networking and storage systems Product description Environmental data Surface mount inductors designed for higher Storage temperature range (component): -40C speed switch mode applications requiring lower to +155C inductance, low voltage and high current Operating temperature range: -40C to +155C Design utilizes high temperature powder iron (Ambient plus self-temperature rise) material with a non-organic binder to eliminate Solder reflow temperature: J-STD-020D thermal aging compliant Inductance Range from 0.2H to 47.0H Current Range from 3.65 amps to 95.0 amps Pb Frequency Range 1kHz to 500kHzHC9 Technical Data DS4312 Effective December 2015 High current power inductors Product specifications 3 4 l (amps) 20% l (amps) 30% DCR (m ) sat sat 6 1 2 5 Part number OCL (H) 15% l (amps) maximum 20C Volt-sec (V-s) rolloff rolloff rms HC9-R20-R 0.218 46.7 65 95 0.50 2.87 HC9-R47-R 0.544 33.7 40 57 0.88 4.78 HC9-1R0-R 1.04 23.7 28 41 1.87 6.70 HC9-1R5-R 1.70 21.0 22 32 2.27 8.46 HC9-2R2-R 2.53 17.2 18 26 3.37 10.4 HC9-3R3-R 3.52 14.3 15 22 4.87 12.4 HC9-4R3-R 4.67 13.0 13.2 19.1 5.90 14.4 HC9-6R8-R 7.45 10.3 11.4 15.1 9.40 18.1 HC9-100-R 10.9 8.50 8.6 12.5 14.0 22.0 HC9-220-R 22.4 6.30 6.0 8.7 25.7 31.5 HC9-330-R 34.5 4.42 4.8 7.0 48.8 37.3 HC9-470-R 49.2 3.65 3.9 5.7 72.3 44.8 1. Open Circuit Inductance (OCL) Test Parameters: 100kHz, 1.0Vrms, 0.0Adc, +25C 6. Part number definition: HC9-xxx-R 2. Irms: DC current for an approximately T of 40C without core loss. Derating is necessary for HC9= Product code and size AC currents. Pad layout, trace thickness and width, airflow, and proximity of other heat generating xxx = Inductance in H. R = decimal point. If no R is present last character equals number of zeros. components will affect the temperature rise. It is recommended that the temperature of the part -R suffix = RoHS compliant not exceed 155C under worst case conditions verified in the end application. 3. Peak current for approximately 20% rolloff 20C 4. Peak current for approximately 30% rolloff 20C 5. Applied Volt-Time product (V-s) across the inductor. This value represents the applied V-s at operating frequency necessary to generate additional core loss which contributes to the 40C temperature rise. De-rating of the I is required to prevent excessive temperature rise. rms The 100% Vs rating is equivalent to a ripple current Ip-p of 20% of Isat (30% rolloff option). Dimensionsmm HC9-xxx-R Part marking: HC9= (Product code and size)-xxx=(inductance value in uH, R= decimal point. If no R is present then last character equals number of zeros. wwlyly=date code, R=revision level Tolerances are 0.2 millimeters unless stated otherwise Do not route traces or vias underneath the inductor Packaging informationmm Supplied in tape and reel packaging, 450 parts per reel, 13 diameter reel. HC9-xxx-R www.eaton.com/elx 2