TRON In-Line Fuse Holders
13 1
HEB Series Single-Pole Breakaway & Non-Breakway for 32 x 1 2 Fuses
Specification Data - Non-Breakaway & Loadside Breakaway
Conductor Terminals
Conductor Data Catalog
Terminal Type Size Symbol
Load &
Line
(2) & (3)
Copper Crimp #12 to #8 1
A
Non-Breakaway Fuse Holders
#12 2
See page 2 for breakaway holders
#10 2
B
#6 1
Catalog Symbol: HEB
#8 2
C
Description:
#4 1
Water resistant, single-pole non-breakaway in-line fuse holders
#6 2
D
13 1
#2 1
for 32 x 1 2 midget fuses. Typical fuse types: BAF, DCM,
#4 2 E
FNM, FNQ and KTK.
#20 to #18 1 Z
Ratings:
Copper Setscrew
Volts: 600V (or less)
Amps: Up to 30A*
#12 to #3 1 J
Agency Information:
(1)
UL Recognized, Guide IZLT2, File E14853
(2)
CSA Certified, Class 6225-01, File 47235
#12 to #3 2 K
(3)
CE
Coupling Nut Torque: 10-20lb-in.
Solid Copper Terminal for
Part Number Explanation
Aluminum Wire Connector
Example: HEB-AK #8 to #12 11
S
HEB = Holder series
#10 to #4 11
A = Loadside terminal (copper crimp for #12 solid
copper wire)
Aluminum Crimp #8 1
N
K = Lineside terminal (copper setscrew for two #6 solid
#6 1
#6 1
copper wires)
P
#4 1
Part Number Selection
#3, #4 1
Q
From the table on page three, select the combination of
#2 1
#1, #2 1 R
desired loadside and lineside terminals for the application
#1/0 1 T
(define terminal type, wire size, number of wires per terminal
and whether the terminal accepts solid and/or stranded
Aluminum Setscrew
conductors). Then in the right hand two columns, select either
the non-breakaway or breakaway holder part number to order.
#12 to #2 1 L
Available Part Numbers
(1) (2) (3) (2) (2)
HEB-AA , HEB-AB , HEB-AC ,
(2) (2)
HEB-AD , HEB-AE , HEB-AJ, HEB-AK, HEB-AL, HEB-AR,
#12 to #2 2 Y
(2) (2) (2) (2)
HEB-AY, HEB-BA , HEB-BB , HEB-BC , HEB-BD ,
(2) (2)
HEB-CC , HEB-DD , HEB-JJ, HEB-JK, HEB-JL, HEB-JY,
(2) (2) (2)
HEB-LL, HEB-NN, HEB-PP , HEB-QQ , HEB-RR ,
(2)
HEB-SS, HEB-TT , HEB-ZA.
Insulating Boots
For insulating boots, see page 2. Insulating boots are not included
with non-breakaway holders and must be ordered
separately. They come standard with the breakaway holders.
When insulating boots are utilized, extra heat retention requires
that fuses are sized at a minimum of 200% of the RMS load
current.
*Amp rating limited by conductor size.
0908 BU-SB08489 Page 1 of 3 Data Sheet 2127
No. Per
Terminal
Solid
StrandedBreakaway Fuse Holders
Specification Data - Lineside Breakaway
Catalog Symbol: HEB
Breakaway Receptacles
Description:
Conductor Data Catalog
13 1
Single-pole breakaway in-line fuse holders for 32 x 1 2 Terminal Type Size Symbol
midget fuses. Typical fuse types: BAF, DCM, FNM, FNQ AND
KTK.
Ratings:
Copper Crimp #12 to #8 1 -RLC-A
Volts: 600V (or less)
#6 1 -RLC-B
Amps: Up to 30A*
#4 1 -RLC-C
Copper Setscrew
Agency Information:
(1)
UL Recognized, Guide IZLT2, File E14853
(2) #12 to #2 1 -RLC-J
CSA Certified, Class 6225-01, File 47235
(3)
CE
Coupling Nut Torque: 10-20lb-in.
Part Number Explanation #12 to #2 2 -RYC
Example: HEB-AW-RYC
HEB = Holder series
Aluminum Setscrew
AW = Loadside terminal (copper crimp for #12 solid
copper wire)
#12 to #2 1 -RLA
RYC = Lineside terminal (copper setscrew for two #6
solid copper wires)
Part Number Selection
#12 to #2 2 -RYA
From the table on page three, select the combination of desired
loadside and lineside terminals for the application (define terminal
type, wire size, number of wires per terminal and whether the
Solid Breakaway (Required with W
Breakaway
terminal accepts solid and/or stranded conductors). Then in the
Receptacle)
right hand two columns, select either the non-breakaway or
breakaway holder part number to order.
Available Part Numbers
Breakaway Units:
(Includes fuse holder, breakaway part and insulating
boots):
Insulating Boots
(1) (2) (3)
HEB-AW-RLA, HEB-AW-RLC-A , HEB-AW-RLC-B,
Part Numbers Type
HEB-AW-RLC-C, HEB-AW-RLC-J, HEB-AW-RYA,
2A0660 Single conductor
HEB-AW-RYC, HEB-BW-RLC-A, HEB-BW-RLC-B,
2A0661 Two conductor
HEB-BW-RYC, HEB-JW-RLC-J, HEB-JW-RYC,
HEB-KW-RLC-J, HEB-KW-RYC, HEB-LW-RLA,
Two insulating boots come standard with the breakaway holders
HEB-LW-RLC-J, HEB-LW-RYA
(2) (2) (2)
(example: HEB-AW-RLC-A). The insulating boots are not
Fuse Holder Only: HEB-AW , HEB-BW , HEB-DW ,
included with the non-breakaway holders (example: HEB-AA) or
HEB-JW, HEB-LW
the individual pieces of the breakaway holders (example:
Breakaway Part: RLC-A, RLC-B, RLC-C, RLC-J,
HEB-AW, RCL-A). Two insulating boots must be ordered for
RYC, RLA, RYA
each holder when ordering them separately. When insulating
boots are utilized, extra heat retention requires that fuses are
sized at a minimum of 200% of the RMS load current.
*Amp rating limited by conductor size.
0908 BU-SB08489 Page 2 of 3 Data Sheet 2127
No. Per
Terminal
Solid
Stranded