Fuseholders for Indicating Fuses GMT Type Dimensional Data Printed Circuit Board Application Note: Similar Body Dimensions Shown With GMT Fuse Installed of All Holders Are Identical. 0.31 Approx. 0.84 0.84 (7.7mm) (21.4mm) (21.4mm) 0.64 (16.3mm) 0.64 1.02 (16.3mm) (25.9mm) 0.13 (3.2mm) 1.02 HLT (25.9mm) 0.15 HLS (3.8mm) HLS-F 0.25 0.15 (6.4mm) (3.8mm) HLS-C 0.13 (3.2mm) HLT-F 0.08 0.41 (2.0mm) (10.3mm) 0.25 (6.4mm) 0.84 HLT-D (21.3mm) Wire Wrap Terminal 0.64 0.025 x 0.063 CATALOG SYMBOL: HLS, HLT, PCT (16.3mm) (0.64mm) (1.6mm) FUSEHOLDERS FOR GMT TYPE INDICATING FUSES 0.45 (11.4mm) ELECTRICAL RATING60V DC, 125V AC Fuse Terminal PCT-A 0.11 UL RECOGNIZED (GUIDE IZLT2, FILE E14853) Alarm Terminal (2.8mm) PCT 15AMP (60V DC) 0.19 Materials: (4.8mm) Body: Thermosplastic, UL 94V0 flammability rating 0.25 Terminals: Tin-plated bifrucated copper x Spaces (6.4mm) Panel Mounting Data Tolerance to be non-accumulative 0.15 (3.8mm) Dia. 0.16 (3.9mm) Dia. For use with GMT Type Indicating Fuses .041 (10.4mm) 0.86 0.27 (21.8mm) (6.7mm) 1.21 Multiple Fuseholders with bus bars (30.8mm) Ordering InformationCatalog No. 0.25 (6.4mm) .09 Dia. Holes (2.4mm) (3 Holes Per Poles of Fuseholder) Termination Location Body Style HLT HLS (No flanges) L R B (Left only) (Right only) (Both ends) No. of Poles 01 thru 25 (Min. of 2 poles required for bus bars) Bus Bar Position Type of bus bars used B1*, B2, B3, P1 P2 P3 P4 B4, B5, SL** (Short Leads .135 ) (Inside (Outside (Outside (Outside ML** (Medium Leads .250 ) Both Sides) Both Sides) Right Only) Left Only) ** Not available with bus bars B1 B2 B3 B4 B5 (Angle Bar Only)* Bar Only) Bar Only) (Angle & Bars) Bars) * Angle Bar mounts on common or center terminals only. Minimum of 4 Poles Required. **SL Version is not available with bus bars. The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled.This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been select- ed, it should be tested by the user in all possible applications. 0712 BU-SB12567 Page 1 of 1 Data Sheet 5010X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Fuse Holder category: Click to view products by Eaton manufacturer: Other Similar products are found below : 570-290-741P40 570-290-751P40 0031.1351.01 020417G 020418E 80910030 8601.2020 9-3557-GP REV A 15600-08-10 BK1-HTC-45M BK/FHN19G BK/HJM-HH BK/HKP-CCHH BK/HKP-E-CC BK/HKP-E-HH BK/HKP-EH-HH BK/HKP-U-HH BK/HTJ-LES-FUSE HMG-241 2086-1 2193 RTMF-SC 2602 2650 FHN31G1 G4PB8 2660 2799 CQ-209V 345621A 3794 4202 4408 4413 4423 4482 4532 4537 TSD1404-12 BK/FHN31G1 BK/HKP-H-CC BK/HKP-JQ-BB BK/HKP-JQW-BB BK/HKP-N-HH BK/HKP-S-CC BK/HKP-W- BBHH BP/HHS BPHHU 55900008011 C1933