Technical Data 11043 Effective April 2020 HS/HSL Supercapacitors Hybrid cylindrical cells HALOGEN Features and benefits Pb HF 3.8 V operating voltage for high energy FREE Low ESR for high power density Up to 8 times energy density compared to standard supercapacitors Low self discharge ideal for use with batteries UL recognized Applications Industrial backup/ride through Backup for storage servers Water and gas smart meters IoT energy storage Medical backup power/alarm Description Commercial trucks/containers asset tracking Eaton hybrid supercapacitors are high reliability, high power, ultra-high capacitance energy storage devices utilizing proprietary materials and processes. This combination of advanced technologies allows Eaton to offer a wide variety *Supercapacitor lifetimes vary based on charge of capacitor solutions tailored to applications for voltage and temperature. See Eatons application backup power, pulse power and hybrid power guidelines or contact your local Eaton sales systems. representative for more information on lifetime They can be applied as the sole energy storage estimates or in combination with batteries to optimize cost, life time and run time. System requirements can range from a few microwatts to hundreds of watts. All products feature low ESR for high power density with environmentally friendly materials for a green power solution. Eaton supercapacitors are maintenance-free with design lifetimes up to 20 years* and operating temperatures down to -25 C (HSL) and up to +85 C (HS) .Technical Data 11043 HS/HSL Supercapacitors Effective April 2020 Hybrid cylindrical cells Ratings Capacitance 30 F to 220 F Working voltage 3.8 V Minimum working voltage 2.2 V Surge voltage 4.0 V Capacitance tolerance -20% to +20% (+20 C) Operating temperature range HSL: -25 C to +60 C HS: -15 C to +70 C Extended operating temperature range HS: -15 C to +85 C (with linear voltage derating to 3.5 V +85 C) Specifications Nominal leakage 2 Maximum Continuous current Peak Stored Short circuit 1 6 5 4 3 7 initial ESR current Peak current (uA) power energy current** 1 Capacitance (F) Part number (m) (A) (A) HS/HSL (W) (mWh) (A) 30 HS/HSL1016-3R8306-R 550 0.15 2.7 3.0/4.0 6.6 40 7.0 50 HS/HSL1020-3R8506-R 450 0.25 3.4 4.0/5.0 8.0 67 9.0 70 HS/HSL1025-3R8706-R 250 0.35 6.1 5.0/8.0 14 93 15 120 HS/HSL1225-3R8127-R 200 0.6 7.7 7.0/12 18 160 19 220 HS/HSL1625-3R8227-R 100 1.1 15.3 12/25 36 293 38 ** Repeated short circuit current will permanently damage the leads. Performance Capacitance change ESR Parameter (% of initial value) (% of maximum initial value) Lifetime: (1000 hours, rated voltage, maximimum operating temperature) 30% 200% 8 Charge/discharge cycles : HS: (500,000 at +20 C), HSL: (250,000 at +20 C) 30% 200% Storage: (3 years, uncharged, <+35 C) 5% 10% 1. Capacitance, Equivalent series resistance (ESR) and Leakage current are measured according to IEC62391-1 2. Leakage current at +20 C after 72 hour charge and hold. 2 2 3. Stored energy (mWh) = 0.5 x (V -V ) x C rated min x1000 3600 2 4. Peak power (W) = V 4 x ESR 5. Pulse current for 1 second from full rate voltage to minimum rated voltage.(A) = (V -V ) x C rated min (1 + ESR x C) 6. Continuous current with a 15 C temperature rise. Continuous current (A) = 7. Short circuit current is for safety information only. Do not use as operating current. 8. Cycling between rated voltage and 2.5 V, 3 second rest at +20 C. Note: Do not discharge supercapacitors below minimimum working voltage. Safety and Certifications Agency information UL810a Shock and vibration MIL-STD 202G Environmental compliance RoHS, REACH, lead free, halogen free Warnings Do not overvoltage, do not reverse polarity Shipping No restrictions, per UN 3508 with all cells <0.3 watt-hours 2 www.eaton.com/electronics