Positionswitch,1N/O+1N/C,roundedplunger Partno. LS-S11S Articleno. 106798 CatalogNo. LS-S11S Deliveryprogramme Basic function Position switches Safety position switches Part group reference LS(M)- Product range Rounded plunger Degree of Protection IP66, IP67 Features Basic device, expandable Ambient temperature C -25 - +70 Design EN 50047 Form B Contacts N/O = Normally open 1 N/O N/C = Normally closed 1 NC Notes = safety function, by positive opening to IEC/EN 60947-5-1 Contact sequence Contact travel = Contact closed = Contact open Positive opening (ZW) yes Colour Enclosure covers Yellow Enclosure covers Housing Insulated material Connection type Screw terminal Technicaldata General Standards IEC/EN 60947 Climatic proofing Damp heat, constant, to IEC 60068-2-78 damp heat, cyclical, to IEC 60068-2-30 Ambient temperature C -25 - +70 Mounting position As required Degree of Protection IP66, IP67 2 Terminal capacities mm 2 Solid 1 x (0.5 - 2.5) mm 2 Flexible with ferrule 1 x (0.5 - 1.5) mm Contacts/switchingcapacity Rated impulse withstand voltage U V AC 4000 imp 03/18/2016 106798 - HPL-ED2016 V20.0 EN 1 / 4Rated insulation voltage U V 400 i Overvoltage category/pollution degree III/3 Rated operational current I A e AC-15 24 V I A 6 e 220 V 230 V 240 V I A 6 e 380 V 400 V 415 V I A 4 e DC-13 24 V I A 3 e 110 V I A 0.6 e 220 V I A 0.3 e Control circuit reliability -7 at 24 V DC/5 mA H Fault F < 10 , < 1 fault in 107 operations probability at 5 V DC/1 mA H Fault -6 6 F < 10 , < 1 failure at 5 x 10 operations probability Supply frequency Hz max. 400 Short-circuit rating to IEC/EN 60947-5-1 max. fuse A gG/gL 6 Repetition accuracy mm 0.15 Rated conditional short-circuit current kA 1 Mechanicalvariables 6 Lifespan, mechanical Operations 8 x 10 Contact temperature of roller head C 100 Mechanical shock resistance (half-sinusoidal shock, 20 ms) Standard-action contact g 25 Operating frequency Operations/h 6000 Actuation Mechanical Actuating force at beginning/end of stroke N 1.0/8.0 Actuating torque of rotary drives Nm 0.2 Max. operating speed with DIN cam m/s 1/0.5 Notes for angle of actuation = 0/30 DesignverificationasperIEC/EN61439 Technical data for design verification Rated operational current for specified heat dissipation I A 6 n Heat dissipation per pole, current-dependent P W 0.17 vid Equipment heat dissipation, current-dependent P W 0 vid Static heat dissipation, non-current-dependent P W 0 vs Heat dissipation capacity P W 0 diss Operating ambient temperature min. C -25 Operating ambient temperature max. C 70 IEC/EN 61439 design verification 10.2 Strength of materials and parts 10.2.2 Corrosion resistance Meets the product standard s requirements. 10.2.3.1 Verification of thermal stability of enclosures Meets the product standard s requirements. 10.2.3.2 Verification of resistance of insulating materials to normal heat Meets the product standard s requirements. 10.2.3.3 Verification of resistance of insulating materials to abnormal heat Meets the product standard s requirements. and fire due to internal electric effects 10.2.4 Resistance to ultra-violet (UV) radiation Meets the product standard s requirements. 10.2.5 Lifting Does not apply, since the entire switchgear needs to be evaluated. 10.2.6 Mechanical impact Does not apply, since the entire switchgear needs to be evaluated. 10.2.7 Inscriptions Meets the product standard s requirements. 10.3 Degree of protection of ASSEMBLIES Does not apply, since the entire switchgear needs to be evaluated. 03/18/2016 106798 - HPL-ED2016 V20.0 EN 2 / 4