OBSOLETE - Recommended replacement with MCRW, Data Sheet 4074 - OBSOLETE
Subminiature Through Hole
MCR Series, Fast Acting, Solid Matrix
Description
Axial Leaded
Fast Acting, Solid Matrix Construction
High Temperature Thermoplastic Body, UL 94 VO
Tin-lead plated copper Lead Wires, .025" diameter
ELECTRICAL CHARACTERISTICS
% of Amp Rating (0-10A) Opening Time
100% 4 hours minimum
250% 5 seconds maximum
Agency Information
Terminal Strength: MIL-STD-202, Method 211, Test
UL Recognition Guide & File Numbers:
Condition A, will withstand 7 lb. axial pull test.
JDYX2 & E19180
Thermal Shock: MIL-STD-202, Method 107, Test
CSA Certification File & Class Numbers: 053787 C 00 &
Condition B, -65C to 125C
1422 30 (0 - 1/8A); 053787 C 00 & 1422 01 (1/4A - 8A)
Thermal Cycle: EIA-STD-RS-186-C, Test Condition A,
Ordering
-55C to 85C
Vibration: MIL-STD-202, Method 204, Test Condition C,
Specify product code and packaging code
(55 to 2000 HZ, 10Gs peak)
Environmental Data
Wave Soldering: Maximum reservoir temperature
Life Test: 2000 hours at 80% rated current, 55C
260C, 10 second maximum exposure, .125" from body.
Moisture Resistance: MIL-STD-202, Method 106, 90%
mm
relative humidity at 65C.
Dimensions (inches)
0.005"
Operating Temperature: -55C to 125C with proper fuse
*All tolerances:
0.13mm
derating
1.13" 1.13"
Resistance to Soldering Heat: MIL-STD-202, Method
28.58mm 28.58mm
210, Test Condition C (260C)
.297"
.12"
Salt Spray: MIL-STD-202, Method 101, Test Condition B
7.54mm
3.10mm
Shock: MIL-STD-202, Method 213, Test Condition I,
100Gs for 6 milliseconds
.025"
Solderability: MIL-STD-202, Method 208 0.64mm
SPECIFICATIONS
2 2
Rated Interrupting Pre-arching Typical Total Clearing Typical Voltage
1 2 2 2 2
Product Voltage Rating I t (A sec) I t (A sec) Drop Volts at
Code AC DC AC DC AC DC AC DC 100% Rated
-6 -7 -6 -7
MCR-1/16 125V 125V 50A 300A 1.1 x 10 1.0 x 10 1.8 x 10 1.5 x 10 2.33
-6 -7 -6 -7
MCR-1/8 125V 125V 50A 300A 4.3 x 10 7.1 x 10 7.3 x 10 8.7 x 10 1.52
-5 -6 -4 -6
MCR-1/4 125V 125V 50A 300A 8.0 x 10 1.0 x 10 1.2 x 10 1.3 x 10 .76
-5 -6 -4 -6
MCR-3/8 125V 125V 50A 300A 9.7 x 10 6.7 x 10 1.1 x 10 8.3 x 10 .73
-4 -5 -3 -5
MCR-1/2 125V 125V 50A 300A 7.4 x 10 5.4 x 10 6.2 x 10 6.8 x 10 .65
-3 -5 -2 -5
MCR-3/4 125V 125V 50A 300A 1.3 x 10 7.4 x 10 7.5 x 10 9.2 x 10 .55
MCR-1 125V 125V 50A 300A .01 .01 .02 .01 .24
MCR-1 1/2 125V 125V 50A 300A .03 .02 .04 .03 .20
MCR-2 125V 125V 50A 300A .09 .07 .11 .08 .16
MCR-2 1/2 125V 125V 50A 300A .19 .14 .25 .17 .15
MCR-3 125V 125V 50A 300A .35 .28 .45 .32 .15
MCR-3 1/2 125V 125V 50A 300A .56 .37 .83 .43 .14
MCR-4 125V 125V 50A 300A .96 .67 1.37 .77 .13
MCR-5 125V 125V 50A 300A 1.82 1.34 2.53 1.51 .11
MCR-7 60V 90V 50A 300A 1.48 .49 2.02 .58 .10
MCR-10 60V 90V 50A 300A 3.62 1.16 4.41 1.38 .08
1. Interrupting ratings were measured at 100% (1/16 to 5) and 100% (7, 10) power factors on AC, and a time constant less than 1 ms. on DC.
2
2. I t was measured at 50 amps 125 VAC, .95PF, (random closing angle) and 300 amps 125 VDC, TC <1ms. for 1/16 through 5 amps and 50 amps 60 VAC, .95PF,
(random closing angle), and 300 amps 90 VDC, TC <1ms. for the 7 and 10 amp fuses.
NOTE: All values shown above are typical.
Device designed to carry rated current for four hours minimum. An operating current of 80% or less of rated current is recommended, with further derating required
at elevated ambient temperatures.
0210 BU-SB10142 Page 1 of 2 Data Sheet 2003OBSOLETE - Recommended replacement with MCRW, Data Sheet 4074 - OBSOLETE
Subminiature Through Hole
MCR Series, Fast Acting, Solid Matrix
TIME CURRENT CURVE
AMPERE
RATING
10
1
.1
.01
.001
CURRENT IN AMPERES
PACKAGING CODE
Packaging Code Description
Blank 10 units
BK 500 units
TR 2,500 pieces on tape and reel per EIA-296, 52.4mm spacing
OC-2544 Rev. A 5/02
Visit us on the Web at www.cooperET.com
3601 Quantum Boulevard Boynton Beach, Florida 33426-8638
Cooper Electronic
Technologies 2002
Tel: +1-561-752-5000 Toll Free: +1-888-414-2645 Fax: +1-561-742-1178
This bulletin is intended to present product design solutions and technical information that will help the end user with design applications. Cooper
Electronic Technologies reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of
any products. Cooper Electronic Technologies also reserves the right to change or update, without notice, any technical information contained in this
bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
0210 BU-SB10142 Page 2 of 2 Data Sheet 2003
TIME IN SECONDS
.01
.1 1/16
1/8
1/4
3/8
1/2
1
3/4
1.0
1.5
2.0
2.5
3.0
4.0
5.0
10
7.0
10.0
100