Illuminatedselectorswitchactuator,3positions,white,maintained +filamentlamp24V Partno. Q18LWK3R-WS/WB Articleno. 072337 CatalogNo. Q18LWK3R-WS-WB Deliveryprogramme Product range RMQ16 (drilling dimensions 16 mm) Basic function Illuminated selector switch actuator Single unit/Complete unit Single unit Description with VS anti-rotation tab with filament bulb 3 positions Function maintained left: 45 right: 45 Colour White Front dimensions Front dimensions 18 18 mm Front ring without front ring Connection to SmartWire-DT no Approvals Product Standards IEC/EN 60947-5 UL 508 CSA-C22.2 No. 14-05 CE marking UL File No. E29184 UL Category Control No. NKCR CSA File No. 46552 CSA Class No. 3211-03 North America Certification UL listed, CSA certified Degree of Protection UL/CSA Type 1 General Standards IEC/EN 60947 6 Lifespan, mechanical Operations > 3 x 10 Operating frequency Operations/h 1800 Operating torque Nm 0.2 Degree of protection, IEC/EN 60529 IP65 Climatic proofing Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature C Open C - 25 - + 60 Enclosed C - 25 - 40 Mounting position As required Mechanical shock resistance g > 40 according to IEC 60068-2-27 Shock duration 11 ms Sinusoidal 2 Terminal capacities 0.5 - 1.0 mm Blade terminal 2.8 x 0.8 mm to DIN 46244 Fast-on connectors 2.8 x 0.8 mm to DIN 46247 and IEC 60760 11/24/2014 072337 - HPL-ED2014 V7.0 EN 1 / 3Contacts Rated impulse withstand voltage U V AC 800 imp Rated insulation voltage U V 250 i Overvoltage category/pollution degree III/3 Rated operational voltage U V AC 24 e Control circuit reliability -7 7 at 24 V DC/5 mA H Fault F < 10 (i.e. 1 failure to 10 operations) probability at 5 V DC/1 mA H Fault -6 6 F < 5 x 10 (1 failure in 5 x 10 operations) probability Use of insulated ferrule ISH 2,8 >24 V AC/DC recommended >50 V AC or 120 V DC is mandatory, even on unused blade terminals DatafordesignverificationaccordingtoIEC/EN61439 Technical data for design verification Static heat dissipation, non-current-dependent P CO 1 vs IEC/EN 61439 design verification 10.2 Strength of materials and parts 10.2.2 Corrosion resistance Meets the product standard s requirements. 10.2.3.1 Verification of thermal stability of enclosures Meets the product standard s requirements. 10.2.3.2 Verification of resistance of insulating materials to normal heat Meets the product standard s requirements. 10.2.3.3 Verification of resistance of insulating materials to abnormal heat Meets the product standard s requirements. and fire due to internal electric effects 10.2.4 Resistance to ultra-violet (UV) radiation Please enquire 10.2.5 Lifting Does not apply, since the entire switchgear needs to be evaluated. 10.2.6 Mechanical impact Does not apply, since the entire switchgear needs to be evaluated. 10.2.7 Inscriptions Meets the product standard s requirements. 10.3 Degree of protection of ASSEMBLIES Does not apply, since the entire switchgear needs to be evaluated. 10.4 Clearances and creepage distances Meets the product standard s requirements. 10.5 Protection against electric shock Does not apply, since the entire switchgear needs to be evaluated. 10.6 Incorporation of switching devices and components Does not apply, since the entire switchgear needs to be evaluated. 10.7 Internal electrical circuits and connections Is the panel builder s responsibility. 10.8 Connections for external conductors Is the panel builder s responsibility. 10.9 Insulation properties 10.9.2 Power-frequency electric strength Is the panel builder s responsibility. 10.9.3 Impulse withstand voltage Is the panel builder s responsibility. 10.9.4 Testing of enclosures made of insulating material Is the panel builder s responsibility. 10.10 Temperature rise The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. 10.11 Short-circuit rating Is the panel builder s responsibility. The specifications for the switchgear must be observed. 10.12 Electromagnetic compatibility Is the panel builder s responsibility. The specifications for the switchgear must be observed. 10.13 Mechanical function The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. TechnicaldataETIM5.0 Low-voltage industrial components (EG000017) / Front element for selector switch (EC000222) Electric engineering, automation, process control engineering / Low-voltage switch technology / Command and alarm device / Front element for selector switches (ecl ss8-27-37-12-13 AKF031010 ) Number of switch positions 3 Type of control element Toggle Suitable for illumination Yes Colour control element Black Colour indicator light cap White Construction type lens Square Hole diameter mm 16 Width opening mm 0 Height meter opening mm 0 11/24/2014 072337 - HPL-ED2014 V7.0 EN 2 / 3