RM60030-1PR Eaton

8 7 6 5 4 3 2 1 IP20 FINGER SAFE C NO. OF CATALOG NO. TERMINAL TYPE POLES W/O INDICATION INDICATION RM60030-1SR SCREW 1 LOCKOUT-TAGOUT 58.9 RM60030-2SR SCREW 2 RING 2.32 F SEE NOTE 6 F RM60030-3SR SCREW 3 RM60030-1PR PRESSURE PLATE 1 88.3 29.5 29.4 RM60030-2PR PRESSURE PLATE CVR-RH-60030 CVRI-RH-60030 2 3.48 1.16 1.16 RM60030-3PR PRESSURE PLATE 3 RM60030-1CR* BOX LUG 1 RM60030-2CR* BOX LUG 2 R3.5 RM60030-3CR* BOX LUG 3 .14 RM60030-1MW14 BOX LUG - 4 PORT MULTIWIRE 1 RM60030-2MW14 BOX LUG - 4 PORT MULTIWIRE NA NA 2 2.1 29.4 RM60030-3MW14 BOX LUG - 4 PORT MULTIWIRE 3 .08 * -CHR ALSO AVAILABLE SEE NOTE 11 1.16 E 4.0 E 158.8 1/8 HEX SOCKET 183.1 .16 6.25 7.21 39.8 4.0 1.56 .16 PROVISION FOR 7.1 MARKING LABEL .28 SEE NOTE 8 160.0 6.30 D D 89.6 60.2 REJECTION RIB 30.8 TYPICAL FOR 3.53 2.37 1.21 CLASS R BLOCKS PROVISION FOR MARKING LABEL SEE NOTE 8 57.8 14.5 45.8 2.28 .57 3/32 HEX SOCKET 1.80 RM60030-1SR RM60030-1PR RM60030-1MW14 C C NOTES: 1) VOLTAGE RATING: 600V RM60030-1CR 2) AMPERAGE: 30A 1-POLE 2-POLE 3- POLE SHOWN WITH COVER 3) WITHSTAND RATING: CLASS R = 200kA CLASS H = 10kA 4) WIRE: CU75C/90C RM60030-1CR SHOWN RM60030-2CR SHOWN RM60030-3CR SHOWN 5) -CR WIRE RANGE: (1) 2 - 14 AWG CU 2-3: 50 lb-in (5.6 Nm) 4-6, 45 lb-in (5.1 Nm) 8, 40 lb-in (4.5 Nm) 10-14, 35 lb-in (4.0 Nm) (2) 12-14, 50 lb-in (5.6 Nm) (1) 2 - 8 AWG AL 2-3: 50 lb-in (5.6 Nm) B B 4-6, 45 lb-in (5.1 Nm) 8, 40 lb-in (4.5 Nm) -MW14 WIRE RANGE: (1) 8-14 AWG CU 8 AWG 3.4 Nm (30 in-lb) 14-10 2.8 Nm (25 in-lb) (2) 12-14 AWG CU 3D VIEW FOR RM60030-1xR 3D VIEW FOR 3D VIEW FOR 3D VIEW FOR 3D VIEW FOR 12-14 3.4 Nm (30 in-lb) WITH COVER RM60030-1MW14 RM60030-1CR RM60030-1PR RM60030-1SR (1) 8-10 AWG AL SCALE NONE SCALE NONE SCALE NONE SCALE NONE SCALE NONE 8 Str/10 Sol: 3.4 Nm (30 in-lb) -SR/PR WIRE RANGE: (1) 10-18 AWG CU ONLY THIS DRAWING IS AN UNCONTROLLED COPY IF PRINTED OR SENT ELECTRONICALLY,DO NOT SCALE DRAWING 10-18 AWG = 20 LB-IN (2.3NM) EATON CORPORATION - CONFIDENTIAL GENERAL DRAWING PRACTICES IN ACCORDANCE WITH ASME - Y14.100-2004 6) USE 4MM DIA. CABLE LOCK OR 1/4 INCH DIA. HASP PADLOCK. AND PROPRIETARY DIMENSIONS AND TOLERANCES IN NOTICE TO PERSONS RECEIVING THIS DOCUMENT AND/OR TECHNICAL ACCORDANCE WITH ASME - Y14.5M-1994 7) RECOMMEND USING DIN-RAIL END STOPS FOR DIN RAIL MOUNTED APPLICATIONS INFORMATION UNLESS OTHERWISE SPECIFIED A BUSSMANN PART NUMBERS BRKT-ND OR BRKT-NDSCREW2 A THIS DOCUMENT, INCLUDING THE DRAWING AND INFORMATION CONTIANED THEREON, DIMENSIONS ARE IN MILLIMETERS IS CONFIDENTIAL AND IS THE EXCLUSIVE PROPERTY OF EATON CORPORATION AND TITLE 8) USE BUSMANN MAKER LABEL TM26CB IS MERELY ON LOAN AND SUBJECT TO RECALL BY EATON AT ANY TIME. BY TAKING POSSESSION OF THE DOCUMENT, THE RECIPIENT ACKNOWLEDGES AND AGREES THAT UNLESS OTHERWISE SPECIFIED TOLERANCES TO BE THIS DOCUMENT CANNOT BE USED IN ANY MANNER ADVERSE TO THE INTERESTS OF 600V / 30AMP CLASS R & H FUSE BLOCK 9) ALL DIMENSIONS ARE TYPICAL UNLESS OTHERWISE INDICATED MILLIMETERS mm.13 EATON AND THAT NO PORTION OF THIS DOCUMENT MAY BE COPIED OR OTHERWISE REPRODUCED WITHOUT THE PRIOR WRITTEN CONSENT OF EATON. IN THE CASE OF ANGULAR 10) COVER NOT APPLICABLE FOR RM60030-xMW14 AND HM60030-xMW14 CONFIGURATIONS 1 SIZE DWG NO. REV CONFLICTING CONTRACTUAL PROVISIONS, THIS NOTICE SHALL GOVERN THE STATUS OF THIS DOCUMENT. 11) -CHR IS IDENTICAL TO THE -CR EXCEPT WITH A 1/8 INCH HEX WIRE CONNECTOR SCREW A3 RM60030-HM60030-SERIES-CP B C 2012 Eaton Corporation, All Rights Reserved. CUSTOMER PRINT SCALE: SHEET THIRD ANGLE PROJECTION 1:2 1 OF 3 8 7 6 5 4 3 2 1 Tue Oct 01, 2013 4:0X PM GPK SLA3 BUSS NAE GENRL REV A8 7 6 5 4 3 2 1 IP20 FINGER SAFE C NO. OF CATALOG NO. TERMINAL TYPE POLES W/O INDICATION INDICATION HM60030-1SR SCREW 1 HM60030-2SR SCREW 2 F F HM60030-3SR SCREW 3 HM60030-1PR PRESSURE PLATE 1 HM60030-2PR PRESSURE PLATE CVR-RH-60030 CVRI-RH-60030 2 HM60030-3PR PRESSURE PLATE 3 HM60030-1CR BOX LUG 1 HM60030-2CR BOX LUG 2 HM60030-3CR BOX LUG 3 HM60030-1MW14 BOX LUG - 4 PORT MULTIWIRE 1 HM60030-2MW14 BOX LUG - 4 PORT MULTIWIRE NA NA 2 HM60030-3MW14 BOX LUG - 4 PORT MULTIWIRE 3 * -CHR ALSO AVAILABLE SEE NOTE 11 E E 1/8 HEX SOCKET D D 3/32 HEX SOCKET C C 3- POLE 2-POLE 1-POLE HM60030-3CR SHOWN HM60030-2CR SHOWN HM60030-1CR SHOWN HM60030-1SR HM60030-1PR HM60030-1MW14 B B 3D VIEW FOR HM60030-1xR 3D VIEW FOR 3D VIEW FOR 3D VIEW FOR 3D VIEW FOR WITH COVER HM60030-1MW14 HM60030-1CR HM60030-1PR HM60030-1SR SCALE NONE SCALE NONE SCALE NONE SCALE NONE SCALE NONE A A TITLE 600V / 30AMP CLASS R & H FUSE BLOCK 1 SIZE DWG NO. REV A3 RM60030-HM60030-SERIES-CP B SCALE: SHEET 1:2 2 OF 3 8 7 6 5 4 3 2 1 Tue Oct 01, 2013 4:0X PM GPK SLA3 BUSS NAE GENRL REV A