HALOGEN Low-Profile Power Inductors HF Pb SD6030 Series FREE Applications SMD Device Notebook computers, digital cameras Gaming consoles, GPS receivers High Power LED driver Wireless notebook adapters Battery power, TFT-LCD Bias supplies Wireless handsets, handheld instruments Description Environmental Data 125C maximum total temperature operation Storage temperature range: -40C to +125C Low profile surface mount inductors Operating temperature range: -40C to +125C 6.0 x 6.0 x 3.0mm maximum surface mount package (ambient plus self-temperature rise) Ferrite core material Solder reflow temperature: J-STD-020D compliant Shielded drum core reduces EMI Packaging Inductance range from 2.7H to 660H Supplied in tape and reel packaging, 2000 per 13 diameter reel Current range from 0.16 to 4.08 Amps Frequency range up to 1MHz Product Specifications 5 1 2 3 4 Part Number OCL H 30% I (Amps) I .(Amps) Typ. DCR mW 20C Max DCR mW 20C K-factor rms sat SD6030-2R7-R 2.7 4.08 2.60 13 18 34 SD6030-3R3-R 3.3 3.54 2.40 18 24 30 SD6030-4R2-R 4.1 3.11 2.20 23 31 27 SD6030-5R0-R 4.9 2.81 1.90 28 38 24 SD6030-5R8-R 5.8 2.58 1.80 33 45 22 SD6030-7R8-R 7.8 2.38 1.60 39 53 19 SD6030-100-R 9.3 2.15 1.30 48 65 17 SD6030-120-R 11.3 1.99 1.20 56 76 16 SD6030-150-R 14.1 1.71 1.10 76 103 14 SD6030-180-R 17.1 1.65 1.00 82 110 13 SD6030-220-R 20.4 1.57 0.90 90 122 12 SD6030-270-R 26.0 1.31 0.85 130 175 11 SD6030-330-R 32.4 1.26 0.75 140 189 9.3 SD6030-360-R 34.4 1.19 0.70 157 212 8.7 SD6030-440-R 44.0 1.10 0.62 185 250 7.9 SD6030-520-R 52.0 0.99 0.58 226 305 7.2 SD6030-680-R 65.6 0.92 0.52 263 355 6.5 SD6030-820-R 81.6 0.80 0.46 343 463 5.9 SD6030-101-R 94.4 0.76 0.42 385 520 5.6 SD6030-121-R 110.1 0.70 0.40 517 620 5.6 SD6030-151-R 144.5 0.64 0.35 608 730 5.0 SD6030-181-R 175.7 0.55 0.32 817 980 4.5 SD6030-221-R 210.9 0.50 0.30 1000 1200 4.0 SD6030-271-R 264.2 0.44 0.27 1300 1560 3.6 SD6030-331-R 313.5 0.38 0.25 1733 2080 3.3 SD6030-391-R 373.7 0.35 0.22 2083 2500 3.0 SD6030-471-R 460.0 0.33 0.20 2250 2700 2.8 SD6030-561-R 546.2 0.30 0.18 2767 3320 2.5 SD6030-681-R 659.4 0.27 0.16 3458 4150 2.3 1) Open Circuit Inductance Test Parameters: 100kHz, 0.1V, 0.0Adc. 4 K-factor: Used to determine B for core loss (see graph). B = K*L*DI, B (mT), K: p-p p-p p-p (K factor from table), L: (Inductance in mH), DI (Peak to peak ripple current in Amps). 2I : DC current for an approximate DT of 40C without core loss. Derating is necessary rms for AC currents. PCB layout, trace thickness and width, air-flow, and proximity of other 5 Part Number Definition: SD6030-xxx-R heat generating components will affect the temperature rise. It is recommended that the SD6030 = Product code and size -xxx = Inductance value in mH temperature of the part not exceed 125C under worst case operating conditions veri- R = decimal point If no R is present, third character = of zeros. fied in the end application. -R suffix = RoHS compliant 3I Amps peak for 35% rolloff ( 25C) sat 1111 BU-SB111167 Page 1 of 4 Data Sheet: 4314Dimensions - mm Part Marking: Coiltronics logo, xxx = Inductance value in uH. R = decimal point. If no R is present third character = of zeros, wwlly or wwllyy = Date code, R = Revision level. Packaging Information - mm Parts packaged on 13 diameter reel, 2000 parts per reel. Core Loss 500kHz 1MHz 300kHz 1 200kHz 100kHz 0.1 0.01 0.001 0.0001 110 100 1000 Bp-p (mT) 1111 BU-SB111167 Page 2 of 4 Data Sheet: 4314 Core Loss (W)