Effective August 2017 Technical Data 4314 Supersedes November 2011 SD6030 Low profile shielded drum core power inductors Applications Notebook, laptop computers Digital cameras LED Drivers TFT LCD Bias supplies Wireless handsets Handheld instruments Gaming consoles Product features GPS devices Battery backup/power 6.0 mm x 6.0 mm x 3.0 mm surface mount package Environmental data Ferrite core material Storage temperature range (component): Shielded drum core reduces EMI -40 C to +125 C Inductance range from 2.7 H to 660 H Operating temperature range: -40 C to +125 C Current range from 0.16 A to 4.08 A (ambient plus self-temperature rise) Frequency range up to 1 MHz Solder reflow temperature: J-STD-020 (latest revision) compliant HALOGEN Pb HF FREESD6030 Technical Data 4314 Low profile shielded drum core power inductors Effective August 2017 Product specifications 5 1 2 3 4 Part Number OCL H 30% I (A) I .(A) K-factor rms sat Typ. DCR mW +20 C Max DCR mW +20 C SD6030-2R7-R 2.7 4.08 2.60 13 18 34 SD6030-3R3-R 3.3 3.54 2.40 18 24 30 SD6030-4R2-R 4.1 3.11 2.20 23 31 27 SD6030-5R0-R 4.9 2.81 1.90 28 38 24 SD6030-5R8-R 5.8 2.58 1.80 33 45 22 SD6030-7R8-R 7.8 2.38 1.60 39 53 19 SD6030-100-R 9.3 2.15 1.30 48 65 17 SD6030-120-R 11.3 1.99 1.20 56 76 16 SD6030-150-R 14.1 1.71 1.10 76 103 14 SD6030-180-R 17.1 1.65 1.00 82 110 13 SD6030-220-R 20.4 1.57 0.90 90 122 12 SD6030-270-R 26.0 1.31 0.85 130 175 11 SD6030-330-R 32.4 1.26 0.75 140 189 9.3 SD6030-360-R 34.4 1.19 0.70 157 212 8.7 SD6030-440-R 44.0 1.10 0.62 185 250 7.9 SD6030-520-R 52.0 0.99 0.58 226 305 7.2 SD6030-680-R 65.6 0.92 0.52 263 355 6.5 SD6030-820-R 81.6 0.80 0.46 343 463 5.9 SD6030-101-R 94.4 0.76 0.42 385 520 5.6 SD6030-121-R 110.1 0.70 0.40 517 620 5.6 SD6030-151-R 144.5 0.64 0.35 608 730 5.0 SD6030-181-R 175.7 0.55 0.32 817 980 4.5 SD6030-221-R 210.9 0.50 0.30 1000 1200 4.0 SD6030-271-R 264.2 0.44 0.27 1300 1560 3.6 SD6030-331-R 313.5 0.38 0.25 1733 2080 3.3 SD6030-391-R 373.7 0.35 0.22 2083 2500 3.0 SD6030-471-R 460.0 0.33 0.20 2250 2700 2.8 SD6030-561-R 546.2 0.30 0.18 2767 3320 2.5 SD6030-681-R 659.4 0.27 0.16 3458 4150 2.3 1) Open Circuit Inductance Test Parameters: 100 kHz, 0.1 Vrms, 0.0 Adc. 4 K-factor: Used to determine B for core loss (see graph). B = K*L*DI, B (mT), K: p-p p-p p-p (K factor from table), L: (Inductance in mH), DI (Peak to peak ripple current in Amps). 2 I : DC current for an approximate DT of 40 C without core loss. Derating is necessary rms for AC currents. PCB layout, trace thickness and width, air-flow, and proximity of other 5 Part Number Definition: SD6030-xxx-R heat generating components will affect the temperature rise. It is recommended that the SD6030 = Product code and size -xxx = Inductance value in mH temperature of the part not exceed +125 C under worst case operating conditions veri- R = decimal point If no R is present, third character equals fied in the end application. number of zeros. -R suffix = RoHS compliant 3 I Amps peak for 35% rolloff ( +25 C) sat Dimensions-mm arts per reel. Part Marking: xxx = Inductance value in uH. R = decimal point. If no R is present third character = of zeros, wwlly or wwllyy = Date code, R = Revision level. Do not route traces or vias underneath the inductor Packaging information-mm Parts packaged on 13 diameter reel, 2000 parts per reel. www.eaton.com/electronics 2