cooper crouse-hindsmalleable iron conduit outlet bodies Applications Cooper Crouse-Hinds Form 5 conduit outlet bodies are ideal for threaded rigid/IMC conduit systems in Form 5 Conduit Outlet Bodies are used in conduit systems to: commercial and industrial applications. Made from durable malleable iron, Act as pull outlets for conductors being installed the line offers convenient features such as built-in rollers* to facilitate wire Provide openings for making splices and taps in conductors pulling, solid neoprene gaskets that can be easily converted to the open Connect conduit sections type, integral bushings for protection of wire insulation, and sheet steel or Provide taps for branch conduit runs cast malleable iron covers with self-retaining stainless steel cover screws. Make 90 bends in conduit runs The bodies and covers are interchangeable with Appleton Form 35 and Now Provide access to conductors for O-Z/Gedney malleable iron conduit outlet bodies, and are suitable for available with maintenance and future corrosive environments due to a tough electro-galvanized finish. NEMA 4 Rated cast system changes covers, sheet steel The offering includes all standard configurations and sizes from to 4 . or integral gasket All are certified to UL and CSA standards. covers New to the Form 5 Line: LB 10 Integral gasket covers. These new sheet steel covers feature a raised dome with stainless steel screws supplied with 9 nylon washers and gasket for simplifying installation, 2 reducing inventory and labor costs. These covers are UL and cUL Listed and are NEMA 4 Rated. 1 SnapPack is now available for Form 5. SnapPack combines a body, a gasket and a sheet steel cover in a single assembly. This adds ordering convenience with just one part number instead of three Simply add the suffix CG to the end of the standard part number, 5 i.e., LB100M CG. The SnapPack is available for the following configurations: LB, LR, LL, C & T in trade T sizes to 2 4 6 LL TM SnapPack Assembly is 8 now available 3 for Form 5 7 11 Features 1 Interchangeable with Appleton Form 35 and 6 Zinc electroplate and aluminum acrylic paint finish for O-Z/Gedney malleable iron conduit outlet bodies corrosion resistance and durability 1 2 7 Built-in rollers on 1 4 to 4 C and LB bodies to Solid neoprene gaskets may be converted to open type by facilitate wire pulling pulling out perforated center section 3 8 Smooth and rounded integral bushings for protection Domed sheet steel covers provide additional cubic capacity of wire insulation 1 1 9 Cast malleable coversflat: 2 to 2 domed: 2 2 to 4 4 Malleable iron construction provides high impact resistance 10 New integral gasket sheet steel coversNEMA 4 Rated and durability 11 Stainless steel self-retaining cover screws 5 Threaded for rigid/IMC conduit 1 *Rollers are standard on 1 4 to 4 type C and LB conduit outlet bodies. Form 35 is a registered trademark of EGS/Appleton Electric. O-Z/Gedney and Appleton are brands of the EGS Electrical Group.