Bussmann Time-Delay Axial Leaded C515 5mm x 15mm Glass Fuses R Dimensional Data 15.0 0.5mm 33.5 1.5mm 5.2 0.3mm 5.0mm (Typ.) 33.5 1.5mm 0.6mm Dia. (Typ.) Markings: Manufacturers Symbol, Product Symbol, Voltage, Ampere, Dimensions are in Testing Agency Mark (Optional) Millimeters (mm) Telecommunication Capabilities: Agency File Numbers: UL Listing: Guide JDYX, UL 1459: Telephone Equipment File E75865. Fuses successfully opened: CSA Certification: Class 1422-01, 600 Volts (AC) 40 Amps File LR65063. 600 Volts (AC) 7 Amps UL Recognized: Guide JDYX2, 600 Volts (AC) 2.2 Amps File E75865. UL 497: Protectors for Paired Conductor Product Symbol: C515 Communication Circuits Physical Fuse Size: 5 x 15mm Fuses successfully passed without opening: 10 x 1000 microsecond waveform Limits for Pre-arcing Time/UL Listed Fuses. 50 pulses/1 pulse every 8 seconds 135% 200% 1000V Amp Ratings MAX MIN MAX Fuse Rating Peak Current (A) 125mA - 7A 60 min. 3 sec. 2 min. 250mA 12.5 Limits for Pre-arcing Time/UL Recognized Fuses. 350mA 19.5 350mA 600mA 2A 6A 375mA 20.0 Amp Ratings MIN MAX MAX MAX 500mA 28.5 350mA 240 min. 90 sec. 2 sec. 500 millisec. 600mA 36.5 750mA 49.0 1A 66.5 Mechanical Characteristics: 1.25A 100.0 Materials: Endcaps are silver-plated brass leads are tin- Fuse resistance was not allowed to vary by more than five percent after plated copper and tube is glass. completion of the test. Optional sleeve is flexible fluoropolymer (UL Packaging & Ordering Information: Flammability rating VW-1). The tube will self C515 extinguish within one minute. 25% maximum Product Ampere flag burn per ASTM Flammability Test ASTM Symbol Rating D2671 Procedure C. Blank - Standard 125mA S - Transparent 250mA Lead Pull: Leads will withstand a seven pound pull sleeve for 350mA applied axially to the lead for five seconds. Package Code sealed fuses. 375mA BK/ Bulk Package (100 pcs) 500mA Lead Bend: Leads will be bent 90 degrees in one direction, TR/ Tape & Reel (500 pcs) 600mA TR1/ Tape & Reel (1,000 pcs) 750mA back to original direction, then 90 degrees in TR2/ Tape & Reel (1,500 pcs) 1A the opposite direction and return to the cycle. NOTE: Tape & Reel Packaging 1.25A Leads will withstand two cycles. The bending per EIA 296-E (10.2mm Component 1.5A Pitch and 52.4mm Tape-to-Tape Spacing) 1.6A is to be done with a two pound weight 2A attached to the end of the lead. 2.25A 2.5A Temp. Range: -55C to +85C with proper derating. 3A 3.5A Weight: 1000 = 1.33kg. 4A 5A 7A CE logo denotes compliance with European Union Low Voltage Directive (50-1000V AC, 75-1500V DC). Refer to BIF document 8002 or contact Bussmann Application Engineering at 314-527-1270 for more information. Form No. C515 12-17-98 Page 1 of 2 SB98107 Rev. A BIF Doc 2006 Bussmann Time-Delay Axial Leaded C515 5mm x 15mm Glass Fuses R Time-Current Characteristic CurvesAverage Melt Time-Current Characteristic CurvesAverage Melt (Full Size Curves Available) (Full Size Curves Available) AMPERE AMPERE RATING RATING 100 100 10 10 1 1 .1 .1 .01 .01 CURRENT IN AMPERES CURRENT IN AMPERES Electrical Characteristics: Rated Voltage Pre-arcing CurrentVoltage DropValue 2 2 Rating (V)AC AIR (mV) max. (I t) (A s) Typ. 125mA 35A/250V 10kA/125V AC 1200 0.039 250mA p.f. = 0.7 - 0.8 630 0.18 350mA 35A/250V 10kA/125V AC 520 0.9 25A/600V p.f. = 0.7 - 0.8 375mA 490 0.9 500mA 35A/250V AC 410 1.1 600mA 10kA/125V AC 350 2.7 750mA 250V p.f. = 0.7 - 0.8 300 2.7 1A 250 6.4 1.25A 220 7.6 1.5A 200 13 1.6A 100A/250V AC 200 14 2A 10ka/125V AC 200 27 2.25A p.f. = 0.7 - 0.8 200 31 2.5A 190 42 3A 190 94 3.5A 180 94 4A 400A/125V AC 150 145 5A 125V p.f. = 1.0 150 230 7A 140 540 The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been select- ed, it should be tested by the user in all possible applications. Form No.C515 12-17-98 Page 2 of 2 SB98107 Rev. A BIF Doc 2006 TIME IN SECONDS .1 250mA 350mA 500mA 1 750mA 1A 1.25A 1.5A 2.5A 3A 10 100 TIME IN SECONDS .1 1 3.5A 4A 5A 10 7A U.L. 100 U.R. CSA