3212J/2H4P ebm papst

Tin-plated 3 Max. 280 m /h DC axial fans 92 x 38 mm 1) Material: Housing: GRP (PBT) Possible special versions: 1) Impeller: GRP (PA) (See chapter DC fans - specials) Direction of air flow: Exhaust over struts - Speed signal Direction of rotation: Clockwise, - Go / NoGo alarm looking towards rotor - Alarm with speed limit Connection: Via single wires AWG 24 - External temperature sensor (H3 and H4: AWG 22), TR 64 - Internal temperature sensor Weight: 240 g (H3 and H4: 280 g) - PWM control input - Analog control input - Moisture protection - Degree of protection: IP 54 / IP 68 1) Fiberglass-reinforced plastic Series 3200 J Nominal data 3 -1 Type m /h cfm VDC VDC dB(A) Bel(A) / Watts rpm C Hours Hours 5 3 1 6 2 4 0 1 - 8 1 3212 JN 130 76.5 12 7...13.8 51 6.1 7.5 6 000 -20 ...+70 70 000 / 35 000 117 500 6 4 1 6 2 4 1 2 - 7 1 3212 JH 146 86.0 12 7...15 55 6.4 9.0 6 800 -20 ...+70 70 000 / 35 000 117 500 3212 JH3 237 139.5 12 6...13.8 69 7.8 31.0* 11 000 -20 ...+70 65 000 / 32 500 110 000 8 4 1 6 3 4 1 2 - 7 1 9 5 1 6 3 5 2 3 - 6 1 3212 JH4 280 164.8 12 6...13.8 73 8.2 50.0* 13 000 -20 ...+70 60 000 / 30 000 110 000 1 6 1 6 4 5 3 3 - 5 9 3214 JN 130 76.5 24 11...28 51 6.1 6.5 6 000 -20 ...+70 70 000 / 35 000 117 500 1 7 1 6 5 6 6 4 - 5 8 3214 JH 146 86.0 24 12...30 55 6.4 9.0 6 800 -20 ...+70 70 000 / 35 000 117 500 8 4 2 1 3 4 1 2 - 7 1 3214 JH3 237 139.5 24 12...27.6 69 7.8 30.0* 11 000 -20 ...+70 65 000 / 32 500 110 000 9 5 2 1 3 5 2 3 - 6 1 3214 JH4 280 164.8 24 12...27.6 73 8.2 50.0* 13 000 -20 ...+70 60 000 / 30 000 110 000 1 6 2 1 4 5 3 3 - 5 9 3218 JN 130 76.5 48 36...56 51 6.1 7.0 6 000 -20 ...+70 70 000 / 35 000 117 500 1 7 2 1 5 6 6 4 - 5 8 3218 JH 146 86.0 48 36...53 55 6.4 9.5 6 800 -20 ...+70 70 000 / 35 000 117 500 8 4 4 3 3 4 1 2 - 7 1 3218 JH3 237 139.5 48 20...58.0 69 7.8 29.0* 11 000 -20 ...+70 65 000 / 32 500 110 000 9 5 4 3 3 5 3 3 - 6 1 3218 JH4 280 164.8 48 20...58.0 73 8.2 50.0* 13 000 -20 ...+70 60 000 / 30 000 110 000 Subject to change 1 7 4 3 5 6 6 4 - 5 8 3200 JH3 and JH4 also available as standard with PWM control input and speed signal. -1 S Speed control range from 2000 rpm up to maximum nominal speed. Standstill at 0% PWM, maximum speed if control cable is interrupted. * Power consumption at free air flow. These values can be significantly higher in the operating point. Air performance measured according to: ISO 5801. Installation category A, without contact protection. Noise: Total sound power level L A ISO 103002 W measured on a hemisphere with a radius of 2 m. Sound pressure level L A measured at 1 m distance p from fan axis. The values given are applicable only under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard configuration, the parameters must be checked after installation For detailed information see