5264NN ebm papst

Tin-plated 3 Max. 340 m /h DC axial fans 127 x 38 mm 1) Material: Housing: GRP (PBT) Possible special versions: 1) Impeller: GRP (PA) (See chapter DC fans - specials) Direction of air flow: Exhaust over struts - Speed signal Direction of rotation: Counterclockwise, - Go / NoGo alarm looking towards rotor - Alarm with speed limit Connection: Via single wires AWG 22, - External temperature sensor TR 64 - Internal temperature sensor Weight: 310 g - PWM control input - Analog control input - Moisture protection - Salt spray protection - Degree of protection: IP 54 / IP 68 1) Fiberglass-reinforced plastic Series 5200 N Nominal data 3 -1 Type m /h cfm VDC VDC dB(A) Bel(A) / Watts rpm C Hours Hours 5212 NM 187 110 12 7...14.5 43 5.3 4.1 2 750 -20...+75 62 500 / 27 500 105 000 5212 NN 216 127 12 7...14 46 5.6 6.2 3 150 -20...+70 57 500 / 25 000 97 500 5212 NH 252 148 12 7...14 51 6.0 9.8 3 650 -20...+70 45 000 / 22 500 75 000 5212 NHH* 340 200 12 9...15 58 6.6 19.0 4 900 -20...+65 45 000 / 25 000 75 000 5214 NM 187 110 24 12...28 43 5.3 4.6 2 750 -20...+75 62 500 / 27 500 105 000 5214 NN 216 127 24 12...28 46 5.6 6.0 3 150 -20...+75 57 500 / 25 000 97 500 5214 NH 252 148 24 12...28 51 6.0 9.8 3 650 -20...+70 45 000 / 22 500 75 000 5214 NHH* 340 200 24 16...30 58 6.6 17.5 4 900 -20...+65 45 000 / 25 000 75 000 5218 NM 187 110 48 36...56 43 5.3 4.5 2 750 -20...+75 62 500 / 27 500 105 000 5218 NN 216 127 48 36...56 46 5.6 6.2 3 150 -20...+70 57 500 / 32 500 97 500 5218 NH 252 148 48 36...56 51 6.0 9.6 3 650 -20...+55 45 000 / 32 500 75 000 5218 NHH* 340 200 48 36...60 58 6.6 18.0 4 900 -20...+65 45 000 / 25 000 75 000 Subject to change ** Power consumption at free air flow, these values can be significantly higher in the operating point. *NHH models: fan housing with molded-in spacers. Air performance measured according to: ISO 5801. Installation category A, without contact protection. Noise: Total sound power level L A ISO 103002 W measured on a hemisphere with a radius of 2 m. Sound pressure level L A measured at 1 m distance p from fan axi. The values given are applicable only under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard configuration, the parametersmust be checked after installation For detailed information see