Compact Diagonal Series K3G200-AD 200 mm Highlights: Control Input: 0-10 VDC/PWM Output: 10 VDC, max 1.1 mA Tach Output Over-temperature protected electronics/motor Soft start, motor current limit Locked rotor protection Material: Impeller: PA plastic Housing: PP plastic Mounting position: Any Condensate discharge holes: None, open rotor Direction of rotation: Clockwise, seen on rotor Nominal Data Type Motor cfm VAC VAC Hz W rpm A in. H 0 C lbs 2 ~ A K3G200-AD21-01 M3G055-BI 547 1 230V 200...240 50/60 80 3100 0.7 0.884 -25...60 4.41 Ball IP54 Yes ~ B K3G200-AD11-02 M3G055-BI 506 1 115V 100...130 50/60 65 2850 1.0 0.723 -25...60 4.41 Ball IP54 Yes (1) Nominal data at maximum load. n Pe I L Ain L Ain p w Curves rpm W A dB(A) dB(A) Air performance measured as per: 3160 69 0.63 64 72 ISO 5801, Installation category 3120 75 0.68 62 70 A, without protection against 1.60 3100 80 0.70 61 69 accidental contact. 3100 76 0.69 61 69 1.40 Suction-side noise levels: L A as W per ISO 13347, L A measured at P 2945 59 0.96 62 70 1m distance to fan axis. 1.20 2885 62 1.00 61 69 A 2850 65 1.00 59 68 The values given are valid under the measuring conditions 1.00 2845 64 1.00 59 68 4 mentioned and may vary accoring to the actual installation situation. 0.80 B 8 With any deviation to the standard 3 set-up, the specific values have 0.60 to be checked and reviewed once 7 installed or fitted. 0.40 2 For detailed information on the 6 measuring set-up, please contact 0.20 ebm-papst. 5 1 0.00 0 100 200 300 400 500 600 qqqq ccccfmfmfmfm pppp in. wg ffffssss Air flow Phase Voltage Voltage range Frequency (1) Power input (1) Speed (1) Current draw Max back pressure (1) Temperature range Mass Bearing Ingress protection rating UL ChartK3G200-ADXX-XX Dimensions shown in millimeters Connection screen Conn. Designation Color Function/ assignment CON10 L black Power supply for voltage range refer to rating plate CON11 N blue Neutral conductor CON12 PE green/yellow Protective earth 1 GND blue GND- Connection for control interface 2 0- 10V PWM yellow Control input0- 10V or PWM, electrically isolated 3 10V/ max 1.1mA red Voltage output 10V/ 1.1 mA, electrically isolated 4 Tach white Tach output: open collector,1 pulse per revolution, electrically isolated, Isink max= 10 mA