RER190-45/18/2TDP ebm papst

Motorized Impeller RER190DC Series 190 x 69mm - New S-Force Models 3-phase fan drive with high degree of smooth operation. High pressure build-up Backward-curved impeller Standard with PWM control input and speed signal, additional inputs and outputs on request. Fiberglass-reinforced plastic impeller Fully integrated electronic commutation Direction of rotation: CW as seen on rotor Direction of air flow: axial suction, radial air outlet Electrical connection via single leads AWG 20, TR 63, speed signal and control input AWG 22. Stripped and tinned ends Part Number RER190-45/18/2TDP 1 635.7 48 36 to 72 216 7.9 65 Ball Leads 4600 1.81 Speed control range from 800 rpm at 7% PWM up to rpm at > 90% PWM. Stationary at 0% PWM, maximum speed at interruption of control wire. Preliminary data, subject to alterations without notice. The air flow and noise level of fans without external housing depends on the installation Air flow conditions. The stated air flow and noise has been measured under the following conditions: Air flow Centrifugal fan mounted on a base plate 195 x 195 mm. Cover plate 195 x 195 mm with an air-inlet of 125.5 mm, concentric to the blower wheel. Short term operation at room temperature 1 allowable in the dotted 800 area of the performance curve 600 only. 400 200 0 100 200 300 400 500 600 CFM V 200 400 600 800 1000 m/h e-mail: sales us.ebmpapst.com TEL: 860-674-1515 FAX: 860-674-8536 ebm-papst Inc., 100 Hyde Road, Farmington, CT 06034 USA ebm-papst Inc., 2009 ebm-papst Inc. reserves the right to change any specifications or data without notice Curve CFM 0 VDC Volt. Range Power Input (W) Bel Max Amb. Temp C Bearing Type Features Speed (RPM) Wgt. (lbs) 2 m m R10 M 4 (4x) m ax. 8 d eep p f Pa (in H O ) 0.8 1.6 2.4 3.2