ECX-L33CN-100.000-TR ECS Inc

TM ECSpressCON ECX-L LVDS ECS-L2 (2.5V) and ECS-L3 (3.3V) low jitter, low current Oscillator Frequency Configurable SMD crystal controlled oscillators. Request a Sample OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS ECS-L2 (+2.5V) ECS-L3 (+3.3V) Parameters Conditions Units MIN TYP MAX MIN TYP MAX Frequency Range 10.000 1500.0 10.000 1500.0 MHz Standard 0 +70 0 +70 C Operating Temperature Extended (N Option) -40 +85 -40 +85 C Storage Temperature -55 +125 -55 +125 C Supply Voltage VDD +2.375 +2.5 +2.625 +3.135 +3.3 +3.465 VDC Option A 100 100 ppm Option B 50 50 ppm Frequency Stability * Option C 25 25 ppm Option D 20 20 ppm 10.0 ~ 100.0 MHz 16 18 mA 100.1 ~ 250.0 MHz 18 20 mA Input Current 250.1 ~ 500 MHz 21 22 mA 500.1 ~ 1500.0 MHz 26 28 mA Output Symmetry 50% V level 45/55 45/55 % DD Load between each Output Load 100 100 Output Output Enable Pin 1 ** 0.7% 0.7% Vdd Output Disable Pin 1 0.3% 0.3% Vdd Disable Current 16 16 mA Output Enable Time 200 200 ns Output Disable Time Pin 1 = VIL 50 50 ns Differential Output Voltage 175 350 175 350 mV Offset Voltage 1.25 1.25 V Rise and Fall Times 10% V to 90% Level 150 350 500 150 350 500 pS DD Aging +25C (first year) 2 2 PPM Start-up Time +25C (first year) 10 10 ms Absolute Voltage Range +3.63 +3.63 VDC Moisture Sensitivity Level 1 Termination Finish Au ESD Sensitivity Human Body Model 3kV Max. *Note: Inclusive of 25 C tolerance, operating temperature, input voltage change, load change, shock and vibration. **Note: Internal pull-up resistor active output if pin 1 is left open. Part Numbering Guide: Example ECX-L35BN-156.250 Package Operating Series Voltage Stability Frequency Packaging Size (mm) Temperature 2 = 2.5 x 2 A = 100 ppm L = -10 ~ +70C Blank =(Bulk) ECX-L 2 = +2.5V 3 = 3.2 x 2.5 B = 50 ppm M = -20 ~ +70C Customer -TR=Tape & Reel N = -40 ~ +85C (LVDS Output) 3 = +3.3V 5 = 5 x 3.2 C = 25 ppm Specified (1K Min/Mult) P = -40 ~ +105C 7 = 7 x 5 D = 20 ppm th 15351 West 109 Street Lenexa, KS 66219 Phone: 913.782.7787 Fax: 913.782.6991 www.ecsxtal.com TM ECSpressCON ECX-L LVDS Oscillator Phase Noise and Jitter Data (typical) Frequency 77.760 122.880 125.000 156.250 212.5 491.520 622.080 1000 1250 (offset) SSB 10 Hz -64 -68 -63 -55 -62 -61 -48 -52 -42 Phase 100 Hz -84 -99 -94 -85 -93 -86 -85 -82 -81 Noise 1 KHz -118 -113 -113 -109 -105 -100 -101 -93 -93 Data 10 KHz -128 -119 -118 -116 -113 -105 -102 -97 -96 (dBc/Hz 100 KHz -137 -120 -119 -118 -115 -105 -103 -97 -97 typical) 1 MHz -145 -140 -137 -139 -135 -126 -124 -116 -119 5 MHz -152 -142 -146 -146 -143 -137 -133 -127 -129 Phase Jitter pS 12 KHz ~ 20 MHz, 0.9 0.8 1.1 0.9 1.0 1.1 1.2 1.5 1.1 RMS Phase Noise Plot of ECX-L35BN-77.760 (typical) Package Data Item Description Lid Metal Base Ceramic Plating Gold/Nickel Surface/Under th 15351 West 109 Street Lenexa, KS 66219 Phone: 913.782.7787 Fax: 913.782.6991 www.ecsxtal.com