EDSYN GMBH EUROPA Zentrum fr Lt- und Entltsysteme EDSYN GMBH EUROPA, Postfach 1169, D-97888 Kreuzwertheim 16.10.2013 Material Safety Data Sheet - according to directive 91/155/EWG INTERNATIONAL STANDART NORM ISO 11014-1 Trade Name: SW 021 Desoldering wick DIN EN 29 453 NF EN 29 454.1 1.) Manufacturer: EDSYN GMBH EUROPA Address: Finkenweg 2 Tel.: 09342 - 6413 D 97892 Kreuzwertheim Fax: 09342 - 6417 2.) COMPOSITION AND INFORMATION ON INGREDIENTS 2.1 Description: Tin Copper desoldering wick 2.2 Ingredients: Ingredients: CAS Number*: % Mass: Copper 7440-50-8 94,996 - 97,997% Tin 7440-31-5 0,003 - 0,004 Modified Rosin 8050-09-7 2,0 - 5,0% *The CAS number is variable and depends on the exact identity of the modified rosins used. In the absence of evidence to the contrary, modified rosins are classified as sensitizers. 3.) HAZARD IDENTIFICATION 3.1 Risk Phrases: R 42 May cause sensitization by inhalation (of fumes produced when used) R 43 May cause sensitization by skin contact 3.2 Safety Phrases: S 23 Do not breathe fumes (created when product is heated to working temperature see section 9) S 24/25 Avoid contact with skin and eyes. 4.) FIRST AID MEASURES 4.1 Eyes: Flush with clean lukewarm water. 4.2 Skin: Wash with soap and lukewarm water. 4.3 Inhalation of flux fumes: Move subject away from source and seek medical aid. 4.4 Oral Ingestion: Do not induce vomiting. Drink clean water and seek medical aid. 5.) FIRE FIGHTING MEASURES (Methods to extinguish) 5.1 Recommended: N/A 5.2 Exceptions: N/A 5.3 Others given: N/A 6.) ACCIDENTAL RELEASE MEASURES (Leakage or spillage) 6.1 Personal precautions: N/A 6.2 Environmental precautions: See notes under heading 13 Disposal considerations. EDSYN GMBH EUROPA D-97892 Kreuzwertheim Finkenweg 2 (09342) 6413 (09342) 6417 EDSYN GMBH EUROPA Zentrum fr Lt- und Entltsysteme EDSYN GMBH EUROPA, Postfach 1169, D-97888 Kreuzwertheim 16.10.2013 7.) HANDLING PACKAGING AND STORAGE 7.1 Handling precautions: Wash hands after handling. 7.2 Packaging: Wound onto plastic bobbins of various capacities. 7.3 Storage conditions: Keep in stores in original boxes at 20C. 8.) EXPOSURE CONTROLS AND PERSONAL PROTECTION (Individual safety) 8.1 Eyes: Safety glasses should be worn if there is a risk of eye contact. 8.2 Skin: Usually not required for normal conditions of use. 8.3 Respiratory: When used, fume extraction equipment must be in operation locally 8.4 Others given: Wash hands before consuming food. 9.) PHYSICAL AND CHEMICAL PROPERTIES 9.1 Physical State (Appearance) Rosin-coated braided tinned copper wire. 9.2 Working temperature: 300 400C (typical) 9.3 Density: 2.60 g/cm at 20C 9.4 Solubility in water: Insoluble 9.5 Flash point (Closed up): Exceeds 260C 9.6 Automatic combustion temperature: Not available 10.) STABILITY AND REACTIVITY 10.1 Condition to avoid: N/A 10.2 Materials to avoid: N/A 10.3 Hazardous decomposition: N/A 11.) TOXICOLOGICAL INFORMATION (Health, hazard and symptoms) 11.1 Exposure: Could cause eye and lung irritation (from flux and fumes when used). 11.2 Long term skin contact: Could cause sensitization. 12.) ECOLOGICAL INFORMATION (Protection of environment) 12.1 Biodegradability: The flux is biodegradable 13.) DISPOSAL CONSIDERATIONS 13.1 Waste Disposal: Any waste materials should be stored in sealed containers and be disposed of according to the relevant Acts of Parliament and Local Authority Bylaws, advice can be obtained from your local waste disposal officer. 13.2 Any scrap solder alloy or dross can be collected by a local metals re- processor. 14.) TRANSPORT INFORMATION EDSYN GMBH EUROPA D-97892 Kreuzwertheim Finkenweg 2 (09342) 6413 (09342) 6417