TopMax III EXPERT UNIVERSAL DEVICE PROGRAMMER Extremely fast Concurrent Universal Device Programmer Extremely fast SPI, QPI Serial memory support MX25L12835FM(SPI), P:41.8 V:6.2 MX25L12835FM(QPI), P:37.6 V:2.1 TopMax-III is a high-speed universal device programmer for USB 1.1/2.0/3.0 PC-interface. It programs a 64Mbit (AM29LV641) ash memory in 42 seconds. This is a true low-cost producon oriented system. The TopMax-III meets the demands of today s programming soluon for lab and producon line applicaons. TopMax-III is a soware driven device programmer that support a wide variety of programmable devices including: EPROM, EEPROM, Serial PROM, EPLD, PEEL, GAL, FPGA, and single chip Microcontroller. The great advantage of this programmer is its programming speed and superior soware. Its controlled via a host IBM PC or compable computer. The operang soware has a user-friendly interface that includes window pull-down menus and virtual memory management to deal with very large les. www.eetools.comKey Features Soware Auto Search Device Select funcon supports E(E)PROMs & Microcontrollers Device Inseron Test idenes improperly inserted device before programming Gang Program Mode allows programming up to 8 sockets concurrently (START ALL Key enables to program the programmers simultaneously) Checks for incorrect device inseron, backward, incorrect posion, and poor pin contact. Device Operaons: Read,Biank check, Program, Verify, Checksum, Data compare, Security, Auto(blank checkprogram- verify), Opon Bit program. Displays programming parameters and oponal bit informaon on the screen. Sets device/buer address ranges before programming devices. User-changeable programming parameters. Built-in editor for both buer date and test vectors. Supports Binary and all hex les (POF and JEDEC, Intel Hex, Motorola S Records, Tekhex , straight hex, hex-space, Extended Tekhex, and others, automac le type recognion) with Load,Edit, and Save commands. Hardware One on-board FPGAs for extremely fast communicaon. Supports real low-voltage such as 5, 3.3, 2.7, 1.8 volts for programming power Detects all pin locaons for poor or damaged pin contacts External START Key allows producon programming mode Internal universal power supply,110-240 VAC (no separate power supply required in foreign country) Current liming protects hardware circuit from improperly inserted or defecve chips and operaon errors Standard 48-pin ZIF(Zero Inseron Force) socket accepts both 300mil and 600 mil DIP devices True universal pin driver hardware Hardware diagnosc program exams all socket-pin drivers before using programmer Devices & Adapters M25Pxx, MX25Lxx, S25LFxx, SST25VFxxx NAND Flash Memory Samsung K9Kxxx, K5Axxx, K5Fxxx, M-System MDOC-256 / 512 / 1G / 2G Toshiba TC58xxx St-Micro NAND01G / 02G / 04G 28Fxxx, 29Fxxx, 38Fxxx, 29LVxxx, 26LVxxx, 29GLxxx, 29ALxxx, 29Wxxx, 36xxx, 32HFxxx, 34VFxxx, 37VFxxx, 39SFxxx, 39VFxxx, 45LFxxx, 49LFxxx, 50FWxxx 27xxx and 27Cxxx series, from 16 Kbit to 32Mbit with 8-bit/16-bit 256 Kbit to 32 Mbit 28Fxxx, 29Fxxx, 29Cxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series (1.5, 1.8, 2.7, 3.3, 5.0, or 12 Volt) 24Cxx, 24Fxx, 25Cxx, 59Cxx, EPC1/1213/1648, and 93Cxx 27Sxx, 7Cxxx, 71xx, 74Sxx, 87Sxx, 82Sxx, ispLSI(10/20)xx, ispGAL22V10, ispGDS1(2)x, LC40(41)xx M4Axxx series PEELs 153, 173, 253, 273, 18CV8, 20CG10 series EPLDs PLCxxx, PLSxxx, PLUSxxx, Epxxx, EPCxxx, EPMxxx, PLDxxx, 5Cxxx, 85Cxxx series TSOP, BGA, QFP, TSOP2, FBGA, TQFP, CSP, uBGA, PLCC, SOIC, EBGA, PoP, SSOP, TFBGA and more Specicaons Dimension TopMax III : 5.5 (L) x 8.14 (W) x 1.63 (H) ,(140mm(L) x 207mm(W) x 41.45mm(H) System requirements A hard disk drive (4 Megabytes) is recommended for soware installaon / set up PC RAM size: 512K of convenonal memory OS: WINDOWS 7,8 or 10 Electrical Requirements Operaon Voltage : 90~264VAC , Frequency Range : 47~63Hz , Power Consumpon : 100W Warranty One year hardware warranty Distributor 881 Yosemite Way Milpitas, CA 95035 Tel : (408) 263-2221 Fax : (408) 263-2230 Email : info eetools.com www.eetools.com