TCPConv USB/RS232 Ethernet/Switch TCPConv adds a device, which is equipped with a USB- or RS232-interface into your local area network (LAN). A typical application is the extension of a network device (i.e. a network printer) by a local peripheral device. Simply insert TCPConv into the existing LAN connection of your device. In order to do so, TCPConv contains 2 LAN ports, which operate as a network switch. The example below shows a typical environment, where a printer is connected to a network:Technical Data Housing ABS UL94-V0 Dimensions (L x W x H) 82mm x 65mm x 25mm / 3.23inch x 2.56inch x 0.98inch Power Power Supply: External power supply 5V Supply Current: 300mA (max., no external load), up to 800mA Temperature Range Operating: 0C to +70C (-4F to 158F) Storage: -40C up to +85C (-40F up to +185F) Relative Humidity 10% to 90% non-condensing Ethernet Switch Transfer Rate: 10 / 100 Mbit/s Other features: Auto MDI/MDIX USB Type: USB HOST Maximum Current: 500mA Supported Devices: Elatec TWN3 and TWN4 transponder readers/writers RS232 Baudrate: Configurable 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600 or 115200 Baud Databits: 7 or 8 bits Parity: None, even or odd parity Stopbits: 1 or 2 Connections Ethernet: 2 x RJ45, 10/100BaseT USB: 1 x USB-A receptacle RS232: 1 x DSUB 9pos Power: For plug 5.5mm/2.1mm LAN Communication Protocols: TCP, IPV4 (IPV6 on request), DHCP, ARP, PING Modes of Operation: TCP Server: Device is connected by a TCP client. TCP Client: Device connects automatically to a specified TCP server. Connection may be triggered by incoming flow of data on either the USB or RS232 port. Certification CE, RoHS-II compliant Weight Approx. 85g (without power supply) Approx. 165g (with power supply) Order Code TC1K-BT1EU TCPConv Kit with 0.5m patch cable (RJ45) and power supply EU TC1K-BT1UK TCPConv Kit with 0.5m patch cable (RJ45) and power supply UK TC1K-BT1US TCPConv Kit with 0.5m patch cable (RJ45) and power supply US TC1K-BT1AUS TCPConv Kit with 0.5m patch cable (RJ45) and power supply AUS TC2K-BT1JP TCPConv Kit with 0.5m patch cable (RJ45) and power supply JP Elatec reserves the right to change any information or data in this document without prior notice. The distribution and the update of this document is not controlled. Elatec declines all responsibility for the use of product with any other specifications but the ones mentioned above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own responsibility. Where application information is given, it is only advisory and does not form part of the specification. Disclaimer: All names are registered trademarks. 2015 Elatec GmbH DocRev8 08/2015 Elatec GmbH 82178 Puchheim Phone: +49 89 5529961 0 info-rfid elatec.com Zeppelinstr. 1 Germany Fax: +49 89 5529961 129 www.elatec-rfid.com