Invertible Air Duster TECHNICAL DATA SHEET Product Code: EADPI PRODUCT DESCRIPTION Electrolubes Airduster aerosols of pure, compressed, inert gas are designed for the safe removal of dust and airborne contamination from very delicate or unaccessible areas of electrical and electronic equipment. Electrolubes Airdusters are non-flammable, non-CFC and non-HCFC products. PRODUCT USE This latest addition to Electrolubes airduster range offers increased power enabling EADPI to be used to remove even stubborn dust and airborne contamination from all electrical and electronic equipment, e.g. computers, typewriters, control equipment etc. It can also be used on such items as cameras and Hi-Fi equipment. EADPI is an invertible version designed for hard to reach areas. Airduster can also be used to evacuate air from the top of cans of paint etc. to stop skin forming. May also assist in drying operations after cleaning etc. FEATURES Copyright Electrolube * Pure compressed inert gas 2003 * Extremely high pressure removes contamination easily and All information is quickly given in good faith but without warranty. TYPICAL PROPERTIES Properties are given as a guide only and should Form: Colourless Gas not be taken as a specification. Density (liquid): 1.176 Electrolube Flashpoint: None cannot be held Boiling Point: -26.2C responsible for Ozone Depleting Potential: 0.00 the performance of its products within any application determined by the customer, who must satisfy themselves as to the suitability of the product. ELECTROLUBE, A division of H K Wentworth, Kingsbury Park, Midland Road, Swadlincote, Derbyshire, DE11 0AN Tel: +44(0) 1283-222111 Fax: +44(0) 1283-550177 www.electrolube.com ISO 9002 Registered Firm. Certificate No. FM 32082 Air Duster Page 2 TECHNICAL DATA SHEET DIRECTIONS FOR USE EADPI is invertible and can be used at various angles in order to reach all areas. Caution Do not use an Airduster for prolonged blasts as the surface of the can will form frost. PACKAGING ORDER CODE 200ml Aerosol EADPI200 Copyright Electrolube 2003 All information is given in good faith but without warranty. Properties are given as a guide only and should not be taken as a specification. Electrolube cannot be held responsible for the performance of its products within any application determined by the customer, who must satisfy themselves as to the suitability of the product. ELECTROLUBE, A division of H K Wentworth, Kingsbury Park, Midland Road, Swadlincote, Derbyshire, DE11 0AN Tel: +44(0) 1283-222111 Fax: +44(0) 1283-550177 www.electrolube.com ISO 9002 Registered Firm. Certificate No. FM 32082