Label Remover TECHNICAL DATA Product Code: LRM SHEET PRODUCT DESCRIPTION Label Remover has been specially formulated for the quick and efficient removal of paper based pressure sensitive adhesive labels. LRM is 100% Ozone Friendly. PRODUCT USE For the removal of pressure sensitive adhesive labels from a variety of surfaces. Product contains combustible solvent so do not spray onto live electrical equipment or other sources of ignition. Spray or wipe on, leave in contact for 5 minutes and then peel off label. Wipe suface clean. FEATURES * Non-CFC, non-halogenated solvent which will not attack Ozone Layer. * Allows label to be simply peeled off without leaving adhesive residue or scratching surface. Copyright * Harmless to most plastics, rubbers, elastomers, and surface Electrolube coatings when used as directed. Test sensitive plastics on a 2003 All information is small area first, and do not use on polystyrene. given in good faith but without * CO propelled aerosol version available containing 20% more 2 warranty. active cleaner, fitted with a 360 valve for use in any Properties are given as a guide orientation. only and should not be taken as a TYPICAL PROPERTIES specification. Electrolube Specific Gravity 20C: 0.830(LRM01L), 0.79(LRM200D) cannot be held Inhalation Toxicity: 300 ppm responsible for the performance Residue on Evaporation: <1ppm of its products within any application determined by the customer, who must satisfy themselves as to the suitability of the product. ELECTROLUBE, A division of H K Wentworth, Kingsbury Park, Midland Road, Swadlincote, Derbyshire, DE11 0AN Tel: +44(0) 1283-222111 Fax: +44(0) 1283-550177 www.electrolube.com ISO 9002 Registered Firm. Certificate No. FM 32082 Label Remover Page 2 TECHNICAL DATA PACKAGING ORDER CODE SHEET 12ml Pen (Pack of 5 Pens) LRM12P 200ml Aerosol LRM200D 200ml Aerosol with Brush LRM200DB 1 Litre Bulk LRM01L NATO Stock no (LRM200D): 8010-99-810-4705 Copyright Electrolube 2003 All information is given in good faith but without warranty. Properties are given as a guide only and should not be taken as a specification. Electrolube cannot be held responsible for the performance of its products within any application determined by the customer, who must satisfy themselves as to the suitability of the product. ELECTROLUBE, A division of H K Wentworth, Kingsbury Park, Midland Road, Swadlincote, Derbyshire, DE11 0AN Tel: +44(0) 1283-222111 Fax: +44(0) 1283-550177 www.electrolube.com ISO 9002 Registered Firm. Certificate No. FM 32082