Report Date : 18/02/2009 REVISION DATE: JULY 2008 MATERIAL SAFETY DATA SHEET THERMALLY CONDUCTIVE ETHOXY RTV 1 IDENTIFICATION OF THE MATERIAL AND SUPPLIER PRODUCT NAME THERMALLY CONDUCTIVE ETHOXY RTV PRODUCT NO. ETCER700 / 75S APPLICATION Manufacture of electrical equipment SUPPLIER H K WENTWORTH PTY LIMITED P.O. BOX 339 BROOKVALE, NSW 2100 AUSTRALIA TEL: 02 9938 1566 FAX: 02 9938 1467 GENERAL MANAGER EMERGENCY TELEPHONE Tel: 029938 1566 between 8.30am and 5.00pm EST PROPER SHIPPING NAME ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (ZINC OXIDE, DIBUTYLTIN DILAURATE) 2 HAZARDS IDENTIFICATION RISK PHRASES R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. SAFETY PHRASES S57 Use appropriate containment to avoid environmental contamination. S61 Avoid release to the environment. Refer to special instructions/safety data sheets. DG CLASS Class 9: Miscellaneous dangerous substances and articles. PACKING GROUP III UN NO. 3082 HAZCHEM CODE 3Z 3 COMPOSITION/INFORMATION ON INGREDIENTS Name EC No. CAS-No. Content Classification Aluminium Oxide 215-691-6 1344-28-1 30-60% - ZINC OXIDE 215-222-5 1314-13-2 10-30% N R50/53 Diisopropoxy-bisethylacetoacetatotitanate 200-659-6 27858-32-8 1-5% Xi R38,R41. The Full Text for all R-Phrases are Displayed in Section 16 COMPOSITION COMMENTS Ingredients not listed are classified as non-hazardous or at a concentration below reportable levels 4 FIRST-AID MEASURES INHALATION Move the exposed person to fresh air at once. Keep the affected person warm and at rest. Get prompt medical attention. INGESTION DO NOT INDUCE VOMITING Rinse mouth thoroughly. Get medical attention. 1 4 / Report Date : 18/02/2009 REVISION DATE: JULY 2008 THERMALLY CONDUCTIVE ETHOXY RTV SKIN CONTACT Promptly wash contaminated skin with soap or mild detergent and water. Promptly remove clothing if soaked through and wash as above. Get medical attention if irritation persists after washing. EYE CONTACT Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues. 5 FIRE-FIGHTING MEASURES EXTINGUISHING MEDIA This product is not flammable. Use fire-extinguishing media appropriate for surrounding materials. HAZCHEM CODE 3Z 6 ACCIDENTAL RELEASE MEASURES SPILL CLEAN UP METHODS Absorb in vermiculite, dry sand or earth and place into containers. Flush with plenty of water to clean spillage area. 7 HANDLING AND STORAGE USAGE PRECAUTIONS Avoid spilling, skin and eye contact. STORAGE PRECAUTIONS Store in tightly closed original container in a cool, dry well-ventilated place. Keep in original container. 8 EXPOSURE CONTROLS/PERSONAL PROTECTION Std TWA - 8 hrs STEL - 15 min Notes Name 10 mg/m3 Aluminium Oxide PROTECTIVE EQUIPMENT ENGINEERING MEASURES Provide sufficient ventilation during operations which cause vapour formation. RESPIRATORY EQUIPMENT No specific recommendation made, but respiratory protection must be used if the general level exceeds the Recommended Occupational Exposure Limit HAND PROTECTION Use suitable protective gloves if risk of skin contact. The most suitable glove must be chosen in consultation with the gloves supplier, who can inform about the breakthrough time of the glove material. EYE PROTECTION Wear approved chemical safety goggles where eye exposure is reasonably probable. OTHER PROTECTION Wear appropriate clothing to prevent any possibility of liquid contact and repeated or prolonged vapour contact. HYGIENE MEASURES DO NOT SMOKE IN WORK AREA Wash at the end of each work shift and before eating, smoking and using the toilet. Wash promptly with soap & water if skin becomes contaminated. When using do not eat, drink or smoke. 9 PHYSICAL AND CHEMICAL PROPERTIES APPEARANCE Paste COLOUR White ODOUR No characteristic odour. SOLUBILITY Insoluble in water RELATIVE DENSITY 2.3 20 c 2 4 /