ECR SERIES
Avionicap
Avionicap Sub-Miniature Metallized Polycarbonate
Avionicap Sub-Miniature Metallized Polycarbonate Capacitors. Replacement
for CK05 ceramics withimproved electrical properties. Ideal for medical devices
and instrumentation, computers, signal processing equipment, precision
testing/measurement equipment, micro circuitry, telecommunications, avionics.
FEATURES
- No Piezoelectric E ect
- Not Frequency Sensitive
- Not Voltage Sensitive
Rev. 2 Speci cation Summary
Quality Control
Capacitance Range
Capacitors are tested 100% for:
0.001F to1.0F
o Capacitance
o Tolerance
Capacitance Tolerance
o Dissipation Factor
Available in Tolerances of 1%, 2%, 5%, 10% and 20%
o Dielectric withstanding Voltage
o Insulation Resistance
Operating Temperature Range
-55C to+125C
Enclosure/ Construction Process and inspection data are maintained on le and available
Premolded epoxy case, epoxy encapsulated. on special request.
Voltage Rating Environmental
DC Working Voltages of 30V, 50V, 75V, 100V, 150V, 200V,
and 250V are standard.
Parameter Method Condition
Vibration 204 D
Immersion 104 B
Shock 213 I
Humidity 103 B
ThermalShock 107 A
Life 108 F
ReferenceMIL-STD-202
Characteristics
Insulation Resistance Capacitance Change
Temperature(C) 25 85 125 Temperature(C) -55 25 85 125
Megaohmsx 100,000 7,000 700 PercentageChange -2.5 0 1.0 2.0
Microfarads (typical)
InsulationResistance CapacitanceChange
Dissipation Factor
When measured at 1KHz, the dissipation factor shall notexceed
0.3% from +25C to+125C.
Dielectric Strength
Capacitance shall withstand a DC potential of 200%
rated voltage for twominutes withoutdamage or
breakdown. Test voltage must be applied and
discharged througha resistance of 1 OHM per volt,
minimum, and at 25C.
Rev. 2