MINIATURE SWITCHES
Ordering Table Standard Toggle Switches
HOW TO ORDER YOUR DESIGN (Bold Face Type indicates items normally in Distributor Stock)
To determine a part number select the options desired and fill in
Following the table from left to right, the designer is able to specify
the boxes in the selection guides illustrated below.
the options wanted. The options are described and illustrated on
pages 24-31. Refer to page 57 for mounting hardware.
Toggle Switch Selection Guide
Toggle Poles
Switch and Lever Lever Bushing Terminal Contact
Series Throw Circuit Options Finish Options Type Material Other
+ ++ + ++ + +
Poles and Throw Circuits Lever Options and Finishes Bushing Options Terminal Options Contact Material Other Option
Series
No. Code Code Type Code Finish Code Type Code Type Code Type Code Type Code
SPDT 1 POS. Lever Lock 1 CW Right Angle PC Gold/Nickel/Brass B Epoxy Sealed
A K1 Splashproof Lever
Bright Chrome
K Bushing Only A Terminals
& Bushing Seal
2 Gold/Nickel/Silver G
Stain Chrome
AV
.840 Bat Splashproof CX Anti-Rotation
DPDT 2 ON OFF ON 21 Vertical PC
L0 P
3 Coin Silver Q
Black
Anti-Jam
Lever Seal Only .100 Spacing
.640 Bat
L1
K
Bushing
AV2
ON NONE ON 23 .280 Threaded D Vertical PC
3PDT 3
.550 Bat L2
.150 Spacing L
Long Mod Cap Black Nylon
L3
4
D9 C M
4PDT 4 ON NONE ON* 26 Printed Circuit
.280 Smooth
Short Mod Cap L4 Red Nylon
5 Terminals
H
.350 Flatted
White Nylon
ON* OFF ON* 27 .200 Bat M 6 With Shoulder Right Angle R
Same Throw
.350 Keyway
H3
.840 Flat P1
With Shoulder
ON OFF ON* 31 Right Angle R2
.450 Flat P3
Opposite Throw
K
Locking K1
.250 Flat P4
32 Lever Only PC & Support
ON ON ON
.410 Bat S V30
T
15/32 Dia.
T1
ON ON ON* 33 .468 Large TW PC & Support
Splashproof Lever
V40
15/32 &
.687 Large T
Panel Seal PC & Support
NONE ON ON* 34
V60
15/32 Splashproof TX
35 Lever PC & Support
ON* ON ON*
Seal Only
V70
.350 Threaded .750 Wire Wrap W
NONE ON ON 53
Y
.437 Threaded Y5 W1
.964 Wire Wrap
(With P3 Only)
W3
.425 Wire Wrap
.350 Smooth
Y9
W4
1.062 Wire Wrap
Z
Solder Lugs
Z3
Quick Connect
Available only with L3 and L4 levers.
*Momentary Contact
Available on S, M and P3 only. Available in 1 pole only.
Add .070 to lever length when using these bushings. See page 58 for construction detail, wiring and electrical diagrams.
Available with S, M, L0, L1, L2, L3, L4 lever options. Consult factory for availability. 1, 2 and 3 pole only.
Standard on P1, P3, P4 and K1 lever options. Available on all other levers except T & T1. Available on T or T1 lever options only.
These circuits are NOT available with the following 3 and 4 pole options: A, AV, AV2, V30, V40, Available on T, TW, and TX bushing options. (Bright chrome only.)
V60 and V70. Not available on K1 lever.
1 and 2 pole only. Same as B, G and Q respectively except terminals brass with tin nickel alloy over nickel plate.
Epoxy seal standard on all terminal options. Consult plant for availability.
EXAMPLES:
A232L01YW1B = DPDT toggle switch with an ON-ON-ON circuit, .840" long lever in a bright chrome finish, .350 threaded bushing, .964" long
wire wrap terminals, gold/brass contacts and epoxy sealed terminals.
SPECIFICATIONS: MATERIALS:
Contact Ratings
Base (body) 1- and 2-pole Diallyl Phthalate (DAP).
Letter codes G and Q 6 amp at 125 VAC, 3 amp @ 250 VAC (U.L.
3- and 4-pole high strength phenolic.
recognized, CSA certified) or 6 amp at 28 VDC resistive.
Lever (toggle) Brass, chrome plated.
Letter codes B and G 0.5. volt-amp (VA) maximum @ 28 V
Flat Lever Brass, satin chrome finish.
maximum (AC or DC).
Locking lever cap Anodized aluminum.
Life Under Load 60,000 make-and-break cycles resistive
Bushing Brass, nickel plated.
load only.
Clamp (frame) Stainless steel.
Initial Contact Resistance 10 milliohms maximum 3 VDC, 100
Support brackets Steel, tin plated.
ma for both silver and gold plated contacts.
Switching Contacts and Rockers
Insulation Resistance 1 & 2 pole 1,000 megohms, min.
Letter Code B gold/nickel/brass
3 & 4 pole 1,000 megohms, min.
Letter Code G gold/nickel/silver
Dielectric Strength 1,000 volts rms at sea level.
Letter Code Q Coin silver
Bushing Strength 12 pound-inches without physical damage to
Center Terminal
switch.
Letter Codes B, G Gold flash/nickel/brass
Letter Code Q Silver plated brass.
Weight (including hardware) SP 0.19 oz.; DP 0.23 oz.; 3-pole
0.28 oz.; 4-pole 0.32 oz.
Hardware See page 55-57.
38 Litho in U.S.A GGMINIATURE SWITCHES
Toggle Switches Base Dimensions and Lever Options
APPROXIMATE BASE DIMENSIONS
ONE POLE TWO POLE
THREE POLE FOUR POLE
TOGGLE LEVER OPTIONS
K1 Locking Lever L0 Long (.840") L1 Long (.640")
L2 Long (.550") L3 Plastic (.840") L4 Plastic (.571")
Litho in U.S.A GG 39