13701 Elesa & Ganter

HFTX. Oil level indicators ELESA Original design technical informations Threaded body with magnifying lens Transparent polyamide based (PA-T) technopolymer. Resistant to solvents, oils with additives, greases, acids and alkali. Avoid contact with alcohol or detergents containing alcohol. Star-shaped contrast screen Matte anodised aluminium with red central level point. Flat packing ring NBR synthetic rubber. Maximum continuous working temperature 110C. Accessories on request Brass nut type GH. for fitting to reservoirs with wall thickness smaller than 5 mm. Features The particular shape of themagnifying lensincreases and improves visibility even from side positions. Technical data An adequate tightening torque (see table below) is recommended when screwing the oil level indicator, so as to guarantee optimal tightness without any deformation of the packing ring. Suggested tightening torque is the result of laboratory tests at ambient temperature (23C) with indicator, packing ring and reservoir walls perfectly cleaned. Note For use with fluids containing special additives, please contact ELESA Sales Department. Standard Elements Main dimensions Tightening torque Weight d Code Description A B D d s Nm g 1 13661 HFTX.11-M16x1.5 M16x1.5 8 7 22 11 19 23 4 13681 HFTX.14-M20x1.5 M20x1.5 9.5 8 26 14 22 810 5 13701 HFTX.18-M25x1.5 M25x1.5 8 9 31.5 18 27 810 8 13726 HFTX.21-M26x1.5 M26x1.5 13 9 31.5 18 27 810 8 13711 HFTX.19-M27x1.5 M27x1.5 9 9 31.5 20 27 810 8 13731 HFTX.22-M30x1.5 M30x1.5 9 10 35 22 30 810 10 13751 HFTX.26-M35x1.5 M35x1.5 11 10 40 25 34 810 13 13771 HFTX.31-M40x1.5 M40x1.5 11.5 13 47.5 30 40.5 810 20 Standard Elements Main dimensions Tightening torque Weight d Code Description A B D d s Nm g 1 13651 HFTX.9-1/4 G 1/4 10 6 18 9 15 23 3 13671 HFTX.12-3/8 G 3/8 7.5 7 22 11 19 35 4 13691 HFTX.15-1/2 G 1/2 10.5 8 26 14 22 46 5 13721 HFTX.20-3/4 G 3/4 10.5 9 31.5 20 27 68 8 13741 HFTX.24-1 G 1 11 10 40 25 34 810 12 13761 HFTX.30-1 G 1 11.5 13 47.5 30 40.5 810 20 ELESA and GANTER models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings.