NDA.Q End-caps for square tubes with adjustable height levelling element technical informations Material Polyamide (PA) based tecnopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Features and applications End-caps for square tubes with adjustable height levelling element. The assembly can be performed simply by positioning the end-cap, forcing it, inside the tube, with no need of screws or other fasteners. Standard Elements Main dimensions Tube dimensions Max limit static load* Weight h h h Thickness Internal Code Description B h s d External N g 1 2 3 min-max max-min 430401 NDA.Q-20-M12x30 20 34 5 SW19 32 5 M12 20 1.5-2 17-16 1000 9 430406 NDA.Q-22-M12x30 22 34 5 SW19 32 5 M12 22 1.5-2 19-18 1000 11 430411 NDA.Q-25-M12x30 25 34 5 SW19 32 5 M12 25 1.5-2 22-21 1000 14 430416 NDA.Q-25-M16x30 25 34 5 SW27 37 5 M16 25 1.5-2 22-21 1500 15 430421 NDA.Q-30-M16x30 30 25 5 SW27 37 5 M16 30 1.5-2 27-26 1500 20 430426 NDA.Q-30-M22x30 30 26 5 SW27 35 5 M22 30 1.5-2 27-26 2500 16 430431 NDA.Q-35-M22x30 35 34 5 SW27 35 5 M22 35 1.5-2 32-31 2500 21 430436 NDA.Q-40-M22x30 40 33 5 SW27 35 5 M22 40 1.5-2 37-36 2500 30 430441 NDA.Q-45-M22x30 45 34 5 SW27 35 5 M22 45 1.5-2 42-41 2500 34 430446 NDA.Q-50-M22x30 50 34 5 SW27 35 5 M22 50 1-1.5 48-47 2500 42 * The value refers to laboratory tests carried out with a load applied vertically to the leveling element unscrewed from the end-cap of 10 mm and leaning on a flat surface. The max limit static load is the value above which the load applied to the element may cause some plastic material breakage, under particular conditions of use. Obviously, a factor that takes into consideration the importance and the safety level of the specific application must be applied to this value. ELESA and GANTER models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings.