430575 Elesa & Ganter

NDL.Q End-caps for square tubes technical informations Material Polyamide (PA) based technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Features and applications The two end-cap parts are connected together by means of two pins which are housed in special counter-seats. A cavity inside the end-cap is provided for housing an hexagonal nut DIN 934. The assembly can be performed simply by positioning the end-cap, forcing it, inside the tube, with no need of screws or other fasteners. Special executions on request End-cap without nut. Standard Elements Main dimensions Tube dimensions Max limit static load* Weight h Thickness Internal Code Description B h d External N g 1 min-max max-min 430551 NDL.Q-20x1.5-2-M6 20 34 5 M6 20 1.5-2 17-16 3000 10 430553 NDL.Q-20x1.5-2-M8 20 34 5 M8 20 1.5-2 17-16 3000 11 430555 NDL.Q-20x1.5-2-M10 20 33 10 M10 20 1.5-2 17-16 3000 16 430557 NDL.Q-20x2-M8 20 34 5 M8 20 2 16 3000 11 430561 NDL.Q-25x1-1.5-M8 25 34 5 M8 25 1-1.5 23-22 3000 17 430563 NDL.Q-25x1.5-M10 25 33 5 M10 25 1.5 22 3000 21 430565 NDL.Q-25x2-M8 25 34 5 M8 25 2 21 3000 16 430567 NDL.Q-25x2-M10 25 34 5 M10 25 2 21 3000 20 430571 NDL.Q-30x1.5-2-M8 30 34 5 M8 30 1.5-2 27-26 3000 20 430573 NDL.Q-30x1.5-2-M10 30 34 5 M10 30 1.5-2 27-26 3000 24 430575 NDL.Q-30x2.5-M10 30 33 5 M10 30 2.5 25 3000 24 430581 NDL.Q-35x1-2-M10 35 34 5 M10 35 1-2 33-31 3000 30 430583 NDL.Q-35x1.5-M12 35 34 5 M12 35 1.5 32 3000 37 430585 NDL.Q-35x1.5-2-M8 35 34 5 M8 35 1.5-2 32-31 3000 26 430587 NDL.Q-35x1.5-2-M12 35 34 5 M12 35 1.5-2 32-31 3000 36 430591 NDL.Q-40x1.5-2-M8 40 33 5 M8 40 1.5-2 37-36 3000 38 430593 NDL.Q-40x1.2-1.5-M10 40 33 5 M10 40 1.2-1.5 37.6-37 3000 42 430595 NDL.Q-40x1.5-2-M10 40 33 5 M10 40 1.5-2 37-36 3000 41 430597 NDL.Q-40x1.5-2-M12 40 33 5 M12 40 1.5-2 37-36 3000 44 430599 NDL.Q-40x1.5-2-M16 40 33 5 M16 40 1.5-2 37-36 3000 55 430601 NDL.Q-40x2-M8 40 34 5 M8 40 2 36 3000 26 430603 NDL.Q-40x3-M10 40 33 5 M10 40 3 34 3000 41 430611 NDL.Q-50x1.5-M10 50 34 5 M10 50 1.5 47 3000 42 430613 NDL.Q-50x2-M8 50 34 5 M8 50 2 46 3000 37 430615 NDL.Q-50x2-M10 50 32 5 M10 50 2 46 3000 41 430617 NDL.Q-50x2.5-M10 50 33 5 M10 50 2.5 45 3000 41 430619 NDL.Q-50x3-M12 50 34 5 M12 50 3 44 3000 50 430621 NDL.Q-60x1.5-2-M10 60 34 5 M10 60 1.5-2 57-56 3000 70 430623 NDL.Q-60x1.5-2-M12 60 34 5 M12 60 1.5-2 57-56 3000 74 * The max limit static load is the value above which the load applied to the element may cause some plastic material breakage, under particular conditions of use. Obviously, a factor that takes into consideration the importance and the safety level of the specific application must be applied to this value. The values shown in the table refer to the use of the end-cap in combination with a steel tube. The use of an aluminum tube may cause a decrease in the max limit static load equal to 25% due to possible deformations of the tube section under load.