CFR.60 SH-6 Elesa & Ganter

CFR. Adjustable hinge FM Design technical informations Material Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Adjusting inserts Technopolymer, black colour. Rotation pin AISI 303 stainless steel. Assembly Through holes for M6 countersunk-head screws. Features and applications The adjusting inserts (ELESA patent) are designed to compensate limited misalignments of doors. Vertical and horizontal adjustments are both possible by simply setting the orientation of the inserts. The knurling on the hinge body holes and on the rear of the inserts avoid any accidental offset of the coupling during the assembly of the hinge so as to offer a secure mounting. A single product code to compensate vertical, horizontal or both misalignments. Rotation angle Max 270, between 0 and -90 and between 0 and 180 (0 = condition where the two interconnected surfaces are on the same plane). Do not exceed the rotation angle limit (see drawing) so as not to prejudice the hinge mechanical performance. To choose the convenient type and the right number of hinges for your application, see the Guidelines. Standard Elements Main dimensions Mounting holes Weight f h h b d d Code Description L B f H d g 1 1 2 1 3 4 426431 CFR.60 SH-6 60 75 34 42 16 9.5 8 29.5 8 6.5 12.5 72 Tightening torque Resistance tests AXIAL STRENGTH RADIAL STRENGTH 90 ANGLED STRENGTH Nm Max limit static load Sa Max limit static load Sr Max limit static load S90 Code Description SH N N N 426431 CFR.60 SH-6 1800 2700 2130 5