374-PSU Elkay

Instruction Data 374-DMBOX Elkay easyDALi Multi-Purpose Box Features DALI Multi-Purpose Box for maximum connection flexibility Connects up multiple strings of DALI PIRS and lighting Maximum 10A rating per box 8 Multiple connections per box Connects power supply for Elkay easyDALi network Can control LED and fluorescent DALI luminaires This Elkay easyDALi multi-purpose box gives installers maximum flexibility and true freedom in building a DALI system by allowing them to use their own cable without the need for expensive connectors. Fitting and operation instructions 1. The multi-purpose box allows the installer to either use it 4. The remaining 6 entry points have 6 connections which if to connect DALI PIRS OR allows them to connect to 10A all are used for DALI lighting only will only utilise the of lighting loads or both. 5 cores Permanent Live, Earth, Neutral and the DALI 2. There are 8 connections per box but one must be used for bus line pair. POWER IN and another for the DALI POWER SUPPLY unit 5. The Switch Live is only used when there is a need to to power the PIRs. This leave 6 connections for either connect some non-DALI lighting thereby increasing the lighting, DALI bus lines or both via either 5 core or 6 core flexibility of the multi-purpose box for the installer. cable of the appropriately sized CSA for your installation. 6. When using Emergency Lighting it gives flexibility to 3. At least one entry point will be used to bring in mains wire the permanent and switch lives as appropriate. a.c. power and the other for the Elkay easyDALi Power 7. As with any DALI network we recommend that all parts of Supply Unit. The unit runs the network power for the Elkay system are accessible for maintenance. easyDALi PIRs and the lighting ballasts. Instruction Data 374-PSU Elkay easyDALi Power Supply Unit Features For use with Elkay easyDALi system Powers DALI network of PIRS and lighting ballasts Thermal and overload protection Connected to multi-purpose connection box (374-DMBOX) Fitting and operation instructions This is essential to power the network of easyDALi PIR sensors and DALI luminaire ballasts connected into the system. 1. One power supply is needed for each separate network. 3. The power supply unit needs just a standard 5 core cable You can either utilise a new power supply for each network to connect it to the Multi-Purpose Box with connections to or ONE power supply for a larger network with the DALI the Live, Neutral, Earth and Dali BUS line terminals PIR sensors dividing the lighting ballasts into groups. 4. At least one entry point will be used to bring in mains a.c. 2. The Elkay easyDALi power supply provides the low d.c. power and the other for the Elkay easyDALi Power Supply power used to power the network. The power supply has Unit. The power supply unit runs the network power for in-built thermal and overload protection. the Elkay easyDALi PIRs and the lighting ballasts.Examples of wiring connections using the Elkay easyDALi multi-purpose box 1. Two networks each shown with their own power supply. 2. Each new power supply starts a new network. 3. Each box connects to easyDALi Power Supply Unit and routes bus lines and lighting cabling. 4. Allows full connectivity of the lighting system and the DALI network.