RJB-10V471MG3# Elna

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RJB 105C Use, Miniature, High-Reliability, Low Impedance Capacitors Series RJB Smaller and higher ripple current than RJJ and RJH Series. Guarantees 5000 hours at 105C. ( 5 to 6.3: 2000 hours 8 to 10: 3000 hours) Miniaturized Low impedance RJB RJJ Marking color : White print on a black sleeve or White print on a brown sleeve Specifications Item Performance Category temperature range (C) 55 to +105 Tolerance at rated capacitance (%) 20 (20C,120Hz) Leakage current (A) Less than 0.01CV + 2 (after 2 minutes) C: Rated capacitance(F) V: Rated voltage(V) (20C) Rated voltage (V) 6.3 10 16 25 35 50 63 100 Tangent of loss angle tan (max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07 (tan) 0.02 is added to every 1000F increase over 1000F. (20C,120Hz) Rated voltage (V) 6.3 10 16 25 35 50 63 100 Characteristics at high Impedance ratio (max.) 55C / +20C 33333333 and low temperature (120Hz) ( 5 to 6.3: 2000 hours) Test time 5000 hours ( 8 to 10 : 3000 hours) Endurance (105C) Leakage current The initial specified value or less (Applied ripple current) Percentage of capacitance change Within 20% of initial value Tangent of the loss angle 200% or less of the initial specified value Test time 1000 hours Leakage current The initial specified value or less Shelf life (105C) Percentage of capacitance change Within 15% of initial value Tangent of the loss angle 150% or less of the initial specified value Voltage application treatment Applicable standards JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing Coefficient of Frequency for Rated Ripple Current Unit: mm Frequency(Hz) Rated 120 1k 10k 100k capacitance(F) Vent(except 5) Sleeve d0.05 copper clad steel wire(tinned) 0.47 to 180 0.40 0.75 0.90 1 220 to 390 0.50 0.85 0.95 1 470 to 1800 0.60 0.88 0.96 1 2200 to 3900 0.75 0.90 0.98 1 4700 to 10000 0.85 0.95 1 1 5 min. L+ max. 15min. Part numbering system (example: 10V1000F) RJB 10V 102 MH4 Environmental Rated voltage Rated capacitance Capacitance Casing item Series code symbol symbol tolerance symbol symbol D 5 6.3 8 10 12.5 16 18 F 2.0 2.5 3.5 5.0 5.0 7.5 7.5 RJB 10 V 102 M H4 Former item d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 Rated voltage Rated capacitance Capacitance Casing Series code symbol symbol tolerance symbol symbol 1.0 1.0 1.0 2.0 2.0 2.0 2.0 The electric characteristics are described on page 106. The standard ratings are described on the next page. NOTE Design, Specifications are subject to change without notice. 63 CAT.No.2004/2005E(2004.10.1) Ask factory for technical specifications before purchase and/or use. D0.5max. F0.5RJB MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Standard Ratings Rated voltage(V) 6.3 10 Rated capacitance ESR Impedance /100kHz Rated ripple current Rated capacitance ESR Impedance /100kHz Rated ripple current Item Case Casing F 20C 10C mArms F 20C 10C mArms DxL(mm) symbol 5x11.5 E3 100 3.15 0.65 1.30 181 6.3x11.5 F3 330 1.11 0.32 0.64 290 220 1.43 0.32 0.64 290 8x12 G3 470 0.78 0.17 0.34 555 330 0.96 0.17 0.34 555 8x12 G3 680 0.54 0.17 0.34 555 470 0.67 0.17 0.34 555 10x12.5 H3 1000 0.36 0.12 0.24 760 680 0.46 0.12 0.24 760 10x16 H4 1000 0.32 0.080 0.16 1050 10x25 H6 2200 0.18 0.052 0.104 1440 12.5x20 I 5 3300 0.13 0.042 0.084 1690 2200 0.16 0.042 0.084 1690 12.5x25 I 6 3300 0.12 0.034 0.068 1950 12.5x30 I 7 4700 0.10 0.030 0.060 2310 16x25 J 6 6800 0.08 0.028 0.056 2560 4700 0.09 0.028 0.056 2560 16x31.5 J 7 10000 0.06 0.025 0.050 3010 6800 0.07 0.025 0.050 3010 16 25 Rated voltage(V) ESR ESR Rated capacitance Impedance /100kHz Rated ripple current Rated capacitance Impedance /100kHz Rated ripple current Item Case Casing F 20C 10C mArms F 20C 10C mArms DxL(mm) symbol 5x11.5 E3 47 4.94 0.65 1.30 181 6.3x11.5 F3 100 2.32 0.32 0.64 290 8x12 G3 330 0.81 0.17 0.34 555 220 1.06 0.17 0.34 555 10x12.5 H3 470 0.57 0.12 0.24 760 330 0.70 0.12 0.24 760 10x16 H4 680 0.39 0.080 0.16 1050 470 0.50 0.080 0.16 1050 10x20 H5 1000 0.27 0.062 0.124 1220 680 0.34 0.062 0.124 1220 12.5x20 I 5 1000 0.23 0.042 0.084 1690 12.5x25 I 6 2200 0.14 0.034 0.068 1950 16x25 J 6 3300 0.10 0.028 0.056 2560 2200 0.12 0.028 0.056 2560 16x31.5 J 7 4700 0.08 0.025 0.050 3010 3300 0.09 0.025 0.050 3010 Rated voltage(V) 35 50 Rated capacitance ESR Impedance /100kHz Rated ripple current Rated capacitance ESR Impedance /100kHz Rated ripple current Item Case Casing F 20C 10C mArms F 20C 10C mArms DxL(mm) symbol 5x11.5 E3 33 6.03 0.65 1.30 181 22 7.54 0.95 1.9 170 6.3x11.5 F3 47 4.23 0.32 0.64 290 33 5.03 0.46 0.92 260 6.3x11.5 F3 47 3.53 0.46 0.92 260 8x12 G3 100 1.99 0.17 0.34 555 100 1.66 0.21 0.42 485 10x12.5 H3 220 0.91 0.12 0.24 760 150 1.11 0.19 0.38 615 10x16 H4 330 0.60 0.080 0.16 1050 220 0.75 0.16 0.32 850 10x20 H5 470 0.42 0.062 0.124 1220 330 0.50 0.085 0.17 1050 12.5x20 I 5 680 0.29 0.042 0.084 1690 470 0.35 0.060 0.12 1500 12.5x25 I 6 1000 0.20 0.034 0.068 1950 680 0.24 0.045 0.090 1832 16x25 J 6 1000 0.17 0.038 0.076 2240 16x31.5 J 7 2200 0.11 0.025 0.050 3010 Rated voltage(V) 63 100 Rated capacitance ESR Impedance /100kHz Rated ripple current Rated capacitance ESR Impedance /100kHz Rated ripple current Item Case Casing F 20C 10C mArms F 20C 10C mArms DxL(mm) symbol 5x11.5 E3 4.7 31.8 1.2 3.6 120 3.3 40.2 1.9 7.6 57 5x11.5 E3 10 14.9 1.2 3.6 120 4.7 28.2 1.9 7.6 57 6.3x11.5 F3 22 6.79 0.55 1.7 148 10 13.3 1.1 4.4 78 6.3x11.5 F3 33 4.52 0.55 1.7 148 8x12 G3 47 3.18 0.32 0.96 360 22 6.03 0.53 2.1 275 10x12.5 H3 100 1.49 0.23 0.69 448 33 4.02 0.47 1.9 319 10x16 H4 47 2.82 0.32 1.3 424 10x20 H5 220 0.68 0.12 0.36 676 12.5x20 I 5 330 0.45 0.075 0.23 979 100 1.33 0.13 0.52 805 12.5x25 I 6 470 0.32 0.065 0.20 1180 16x25 J 6 220 0.60 0.081 0.32 1290 16x25 J 6 330 0.40 0.081 0.32 1290 16x31.5 J 7 1000 0.15 0.042 0.13 1890 470 0.28 0.059 0.23 1630 (Note) ESR : 20C, 120Hz Rated ripple current : 105C, 100kHz NOTE Design, Specifications are subject to change without notice. 64 CAT.No.2004/2005E(2004.10.1) Ask factory for technical specifications before purchase and/or use.