EN-30 EMO Systems

ENGLISH EMOSAFE EN-30 Product Datasheet December 2015 Gigabit Network Isolator in aluminium housing 1 FEATURES AND ADVANTAGES Gigabit Ethernet Hardwearing aluminium housing Optionally usable mounting bracket UL Recognized Component RoHS compliant 4 kV AC dielectric strength 5.6 kV DC dielectric strength rd IEC 60601-1 compliant (3 Edition) 100% inspection by our Quality Control 2 GENERAL DESCRIPTION EMOSAFE EN-30 Network Isolators disconnect every electrically conducting connection (specifically the data and shield conductors) between devices connected together via a copper-based Ethernet network. The Network Isolators prevent current flow resulting from differences in electrical potentials, and also protect connected devices and their users from stray external voltages and power surges which may be directly or inductively coupled onto the network lines by causes such as installation errors, lightning, switching operations, and electrostatic discharge. Built into a medical electrical (ME) product, the EMOSAFE EN-30 Network Isolator facilitates the safe Ethernet connection of this ME product within the patient environment. The EN-30 satisfies all construc- rd tion requirements of IEC 60601-1 (3 Edition) in the formation of two means of patient protection (MOPP) within the network interface, thereby practically eliminating the risk of electrical shocks arising from such stray external voltages at the network connection. PD1100-V20 Page 1 of 12 2015 EMO Systems GmbH EMO Systems GmbH Rungestr. 19 10179 Berlin Germany Phone: +49-30-4000-475-80 Fax: +49-30-4000-475-90 www.emosystems.de/en The EN-30 has an elegant and hardwearing aluminium housing. Included with the EN-30 are four self- adhesive rubber feet which, when attached to the underside of the housing, ensure a secure grip on smooth surfaces. Also included is an aluminium mounting bracket, which permits the screwing of the EN-30 to a wall or to a device panel. The EN-30 is further distinguished by its gigabit Ethernet capability, and also by its robust construction. As a UL Recognized Component, the EN-30 Network Isolator is also suitable for inclusion in systems des- tined for export in the North American markets. EMOSAFE Network Isolators transmit high-frequency signals through the principle of electromagnetic in- duction. Because of this, they do not require their own power supplies. There are no software drivers to be installed. 3 APPLICATIONS 3.1 PATIENT PROTECTION Electrical separation of Ethernet interfaces of medical electrical (ME) devices and systems, where patients must be protected from dangerous leakage currents, in conformity with applicable standards. 3.2 EQUIPMENT PROTECTION Applications, in which valuable devices or those requiring special protection need to be protected against ripple, mains hum, and surge voltages from the network periphery. 3.3 MEASUREMENT TECHNOLOGY Electrical measuring and monitoring equipment, which needs to be protected against external voltages and interference voltages arising from the Ethernet periphery. 3.4 AUDIO Audio applications, in which the transmission of low frequency alternating current voltages (mains hum) over the network connection is to be reduced to an imperceptible level. PD1100-V20 Page 2 of 12 2015 EMO Systems GmbH EMO Systems GmbH Rungestr. 19 10179 Berlin Germany Phone: +49-30-4000-475-80 Fax: +49-30-4000-475-90 www.emosystems.de/en