EPIC LS1 Series Circular Power & Mixed Power Connectors EPIC LS1 Circular and Mixed Power Connectors are designed to DIN specification EN61984 and have a standard M23 threaded connection housing. They are offered in male coupler, female connector, and male inlet configurations that satisfy simple cable-to-cable and cable-to-machine requirements. They are ideal for power transmission and servo drive applications in the plastics, printing, analytical instrument, robotic, machine tool industries, and any other industrial or commercial application where a compact connector with high voltage and current capability is required. 800-774-3539 www.lappusa.com EPIC LS1 Series Circular Power & Mixed Power Connectors Equipment Description Cap Nut EPIC LS1 Connectors are available in five housing arrangements and two contact configurations. Lamellar Common to all arrangements are a rugged nickel Insulation Cable Clamp plated zinc body, plastic contact insulation body and Body & Seal sleeve, and gold plated electrical contacts (included with the connector part number). Cable mounted EMC Shield arrangements also include an integral EMC shield Ring ring and cable clamp and seal. The figure to the Female right shows the general construction of these Connector Contacts connectors. Body & Coupling Nut These connectors are offered with a 5+PE contact configuration for power distribution (5 contacts plus Marking Ring ground rated at 630 volts and 22 amps), and a Insulation Sleeve 3+PE+4 contact configuration for mixed power and signal requirements for servo motor with brake and feedback applications (3 contacts plus ground rated 630 volts and 22 amps and 4 contacts rated 250 Panel Mount volts and 7 amps). Used in combination, they Base with connect one flexible cable with another (cable Vibration coupler) or one flexible cable to fixed wiring on a Protection Ring machine (appliance coupler). & Panel Seal Features & Benefits The new EPIC LS1 connectors have many inherent Male Contacts features which offer application advantages and provide significant benefits. These features make it one on the most application friendly connectors Technical Specifications available, and insure quick and easy assembly, high reliability, and long, uninterrupted service life in tough of Contacts: 5+PE, 3+PE+4 industrial environments. Rated Voltage: VDE: 630V (2mm contacts) 250V (1mm contacts) Key features include: UL: 600V Rugged nickel-plated, die-cast zinc body Rated Current: 22 amps (2mm contacts) 7 amps (1mm contacts) Positive vibration protection for use with motor Impulse Voltage: 6kV (2mm contacts) drives and moving assemblies 4kV (1mm contacts) Contact Resistance: <5m Ohms Integral EMC cable gland provides strain-relief, Mating Cycles: 500 IP67/68 protection, and 360 shielding Temperature Range: -25C to +125C Protection Class: IP67/68 (10h/1m) Identification Wire Gauge (Crimp): 2 mm contacts: 2 marking field 0.5 to 2.5 mm (20-14 AWG) and optional color 1 mm contacts: 2 marking clips can 0.14 to 1.0 mm (24-18 AWG) be used to provide Cable Diameter: 7.5 to 15.5 mm positive identification Materials: Housing: Nickel Plated Zinc (Die Cast) and visual differentiation Insulation Body: PA, PBT, UL94 V-0 in multiple connector Contacts: Gold plated copper alloy installations. Gaskets & Seals: FPM Standards: DIN EN 61984 Approvals: 800-774-3539 www.lappusa.com