2101G-140 ERG

Bahco Group - Product Card Side cutting pliers, 2101G Side cutting plier with progressive edges designed to cut hard material such as piano wire close to the joint and to cut softer material as copper wire and plastic insulated wire at the tip. ISO: 5749 DIN: 5749 Finish: Black oxidised, anti-corrosion treated. Material: Chrome-Vanadium. With Ergo handles in two-material combination. Thermoplastic surface on tough polypropylene which gives a superior grip. Shape: Anope joint, in which the distance from the joint centre to the cutting edges is reduced, results in greater leverage and increased cutting capacity. Progressive cutting edge which cuts hard material near the joint and soft materials at the tip. Round shaped jaws give improved accessibility in confined spaces. Equipped with a return spring featuring an on/off function. Cutting capacity: Piano wire. IP = Industrial Pack A B C D E F G mm mm mm mmmmmmmm 5 2101G-125 0106462 125 14 17.5 8 1.0 1.2 14 1.6 105 5 2101G-140 0106479 140 16 19.5 9 1.5 1.3 16 1.8 126 5 2101G-160 0106486 160 18 21.5 10 2.0 1.5 18 2.0 162 5 2101G-180 0106493 180 20 23.5 11 2.5 1.5 20 2.25 245 5 2101G-200 0106509 200 22 25.5 11 2.5 1.5 22 2.5 304 5 2101G-125IP 0106516 125 14 17.5 8 1.0 1.2 14 1.6 105 5 2101G-140IP 0106288 140 16 19.5 9 1.5 1.3 16 1.8 126 5 2101G-160IP 0106295 160 18 21.5 10 2.0 1.5 18 2.0 162 5 2101G-180IP 0106523 180 20 23.5 11 2.5 1.5 20 2.25 245 5 2101G-200IP 0106530 200 22 25.5 11 2.5 1.5 22 2.5 304 X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for erg manufacturer: Other Similar products are found below : BE-8610 BE-8705 BE-8600 SDC-4-023 RX8150 4239 BE-7806 BE-8702 BE-8706 BE-8160 BE-8801 BE-8910 BE-7808 BE-8620 BE- 8350 BE-8602 BE-7804 BE-8907 RX8141 4131 2101G-160 2427G160 BE-8802 BE-8601 BE-8908 BE-8040 9070 BE-7807 020741E DS16C1-8 DS16C4-2 SDS-4-023 ERG16-412/2 SDS-10-014 ERG10-412/6 SDD-2-023 SCS-4-023 ERG10-412/2 JSA4-1-G0