Public E PRODUCT SPECIFICATION 1 (3) Prepared (also subject responsible if other) No. Public SEC/D Kevin Zhou 1/1301-BMR63701 TABLE OF CONTENTS 1 (1) Technical Specification Approved Checked Date Rev Reference Prepared (also subject responsible if other) No. EN/LZT 146 307 R4A August 2008 PKM 4000C PINB Series SEC/D Kevin Zhou MICOSPE 2007-1-29 F EFEIDEN 001 52- EN/LZT 146 307 Uen Ericsson Power Modules AB DC/DC converters, Input 36-75 V, Output 55 A/204 W Key Features Industry standard quarter-brick and optional double Pin-Out. 57.9 x 36.8 x 9.1 mm (2.28 x 1.45 x 0.35 in.) High efficiency, typ. 94 % at 12 Vout half load 2250 Vdc input to output isolation Meets isolation requirements equivalent to basic insulation according to IEC/EN/UL 60950 More than 2.7 million hours MTBF General Characteristics Over temperature protection Over current limit protection Over voltage protection Remote control Output voltage adjust function Highly automated manufacturing ensures quality ISO 9001/14001 certified supplier Safety Approvals Design for Environment Meets requirements in high- temperature lead-free soldering processes. Contents General Information .............................................................2 Safety Specification .............................................................3 Absolute Maximum Ratings .............................................................4 Product Program Ordering No. 2.5V, 55A / 137.5W Electrical Specification PKM4119C PINB.................................. 5 3.3V, 50A / 165W Electrical Specification PKM4110C PINB.................................. 8 5.0V, 40A / 200W Electrical Specification PKM4211C PINB................................ 11 12.0V, 17A / 204W Electrical Specification PKM4213C PINBSP ........................... 14 EMC Specification ........................................................... 17 Operating Information ...........................................................18 Thermal Consideration ...........................................................20 Connections ...........................................................20 Mechanical Information ...........................................................21 Soldering Information ...........................................................25 Delivery Information ...........................................................25 Product Qualification Specification ...........................................................26 Public E PRODUCT SPECIFICATION 2 (3) Prepared (also subject responsible if other) No. SEC/D Kevin Zhou 1/1301-BMR63701 2 Technical Specification Approved Checked Date Rev Reference EN/LZT 146 307 R4A August 2008 PKM 4000C PINB Series SEC/D Kevin Zhou MICOSPE 2007-1-29 F Ericsson Power Modules AB DC/DC converters, Input 36-75 V, Output 55 A/204 W - Lead in glass of electronics components and in General Information electronic ceramic parts (e.g. fill material in chip resistors) Ordering Information - Lead as an alloying element in copper alloy containing See Contents for individual product ordering numbers. up to 4% lead by weight (used in connection pins made of Brass) Option Suffix Ordering No. Baseplate PKM 4110C PI Quality Statement Single Pin* SP PKM 4211C PINBSP Positive Remote Control Logic P PKM 4110C PIPNB The products are designed and manufactured in an Increased stand-off height M PKM 4110C PINBM industrial environment where quality systems and methods Lead length 3.69 mm (0.145 in) LA PKM 4110C PINBLA like ISO 9000, 6 (sigma), and SPC are intensively in use to Lead length 4.57 mm (0.180 in) LB PKM 4110C PINBLB boost the continuous improvements strategy. Infant Note: As an example a positive logic, increased standoff, short pin product mortality or early failures in the products are screened out would be PKM 4110C PIPNBMLA. and they are subjected to an ATE-based final test. *Single Pin option only for current less than 50A. Reliability Conservative design rules, design reviews and product qualifications, plus the high competence of an engaged The Mean Time Between Failure (MTBF) is calculated at full work force, contribute to the high quality of our products. output power and an operating ambient temperature (T ) of A +40C, which is a typical condition in Information and Warranty Communication Technology (ICT) equipment. Different Warranty period and conditions are defined in Ericsson methods could be used to calculate the predicted MTBF Power Modules General Terms and Conditions of Sale. and failure rate which may give different results. Ericsson Power Modules currently uses two different methods, Limitation of Liability Ericsson failure rate data system DependTool and Telcordia SR332. Ericsson power Modules does not make any other warranties, expressed or implied including any warranty of Predicted MTBF for the series is: merchantability or fitness for a particular purpose - 2.7 million hours according to DependTool. (including, but not limited to, use in life support - 1.4 million hours according to Telcordia SR332, issue applications, where malfunctions of product can cause 1, Black box technique. injury to a persons health or life). The Ericsson failure rate data system is based on field tracking data. The data corresponds to actual failure rates of components used in ICT equipment in temperature controlled environments (T = -5...+65C). A Telcordia SR332 is a commonly used standard method intended for reliability calculations in ICT equipment. The parts count procedure used in this method was originally modelled on the methods from MIL-HDBK-217F, Reliability Predictions of Electronic Equipment. It assumes that no reliability data is available on the actual units and devices for which the predictions are to be made, i.e. all predictions are based on generic reliability parameters. Compatibility with RoHS requirements The products are compatible with the relevant clauses and requirements of the RoHS directive 2002/95/EC and have a maximum concentration value of 0.1% by weight in homogeneous materials for lead, mercury, hexavalent chromium, PBB and PBDE and of 0.01% by weight in homogeneous materials for cadmium. Exemptions in the RoHS directive utilized in Ericsson Power Modules products include: - Lead in high melting temperature type solder (used to solder the die in semiconductor packages)