PSB50 50 W PSB50/40/30 PSB40 40 W Series PSB30 30 W 50, 40 & 30 W Programmable Constant Current LED Driver with Tri-Mode Dimming (TRIAC, ELV & 0-10 V) Max. Nominal Input Max. Case Dimming Startup Output Efficiency THD Power Factor Dimming Method Voltage Temperature Range Time Power < 20% > 0.9 Forward-Phase, up to 90% 90C (measured 1 - 100% 200 ms 120 to 277 Vac 50 W (from 100% to 50% (from 100% to 50% Reverse-Phase typical at the hot spot) (% of Iout) typical & 0 - 10V of max rated power of max rated power) TRIAC/ELV Dimmer + Dim 0-10 V - Dim Dimmer PSB50 + LEDs Series Aluminum Case L 98.5 * W 25.4 * H 19.05 mm - LEDs (L 3.88 * W 1.00 * H 0.75 in.) Purple: + Dim White: Neutral Grey: - Dim FEATURES PSB50 Non-linear 0-10V dimming prole with dim-to-o Series Red: + LEDs (10V to 9.1V=100%, 1.5V to 0.6V=1%, <0.6V=dim-to-o) Black: Line Blue: - LEDs UL Class P Class 2 power supply Wiring Diagram Lifetime: 50,000 hours Tc = 75C 90C maximum case hot spot temperature IP20-rated (IP64 as option) case with silicone-based potting Surge protection: OTHER MOUNTING OPTIONS IEC61000-4-5: 2 kV line to line/2 kV line to earth 2.5 kV ring wave: ANSI/IEEE c62.41.1-2002 & c62.41.2-2002 category A Complies with ENERGY STAR, DLC (DesignLight Consortium) and CA Title 24 technical requirements PROGRAMMING Bottom Leads with Studs European Terminal Blocks Add -X sux to part Add -T sux to part Serial port programming number. number. Current: 100% to 50% in each voltage range Data log read: SKU, S/N, lot code, hours of operation, FW rev., fault events: power failure, APPLICATIONS transients (short or surge), thermal Commercial & residential lighting Architectural lighting OPTIONS Indoor Lighting Alternate 0-10V dimming proles: Linear, Logarithmic, Ballast type Mark7 (IEC60929, ANSI C82.11) Energy metering (as part of future software upgrade) 5 CA Title 24 PSB50/40/30 Series Data Sheet Preliminary Information 1 ERP Power, LLC Rev. December 2017 Preliminary InformationPSB50 50 W PSB50/40/30 PSB40 40 W Series PSB30 30 W 50, 40 & 30 W Programmable Constant Current LED Driver with Tri-Mode Dimming (TRIAC, ELV & 0-10 V) 1 - ORDERING INFORMATION Nominal Max Open Loop Vout Vout Vout Input Output Iout (No Load) Part Number Min. Nom. Max. Voltage Power (mA) Voltage (Vdc) (Vdc) (Vdc) (Vac) (W) (Vdc) PSB30W PSB30W-0700-42 120 to 277 29.4 350 to 700 27 37.8 42 50 PSB30W-1050-27 120 to 277 28.4 525 to 1050 17 24.3 27 35 PSB30W-0800-34 120 to 277 27.2 400 to 800 20 30.6 34 44.2 PSB40W PSB40W-1400-27 120 to 277 37.8 700 to 1400 17 24.3 27 35 PSB50W PSB50W-0550-85 120 to 277 46.8 275 to 550 54 76.5 85 100 PSB50W-0850-56 120 to 277 47.6 425 to 850 36 50.4 56 60 PSB50W-1200-42 120 to 277 50.4 600 to 1200 27 37.8 42 50 PSB50W-1400-34 120 to 277 47.6 700 to 1400 20 30.6 34 44.2 Notes: For each model, the default output current setting is the maximum current. To order the mounting option Bottom Leads with Studs, add the sux -X. Example: PSB50W-1200-42-X To order the mounting option Terminal Blocks, add the sux -T. Example: PSB50W-1200-42-T For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy erp-power.com Please order the programming cable using the part number PROG-JACK-USB. SaveEnergy erp-power.com 2 www.erp-power.com Preliminary Information