SERIES JA ENGINEERING DATA SHEET RELAY - NONLATCH - AC COIL 2 PDT, 10 AMP 115 Vac and 28 Vac, 400 Hz and 50/400 Hz Coil Voltages All welded construction Contact arrangement 2 PDT MIL-PRF-83536 Qualified to PRINCIPLE TECHNICAL CHARACTERISTICS 28 Vdc 115 Vac, 400 Hz, 1 Contacts rated at and 115/200 Vac, 400 Hz, 3 0.088lb max Weight Dimensions 1.01in x .51in x 1.12in Special models available upon request. Hermetically sealed, corrosion resistant metal can. APPLICATION NOTES: 102 007 023 APPLICABLE SOCKET: SO-1049-8772/8774 SO-SSL CONTACT ELECTRICAL CHARACTERISTICS Contact rating Load current in Amps per pole and load 28 Vdc 115 Vac 115/200 Vac 115/200 Vac 230/400 Vac type 1 400 Hz 400 Hz, 3 60 Hz, 3 6 400 Hz, 3 8 Resistive 10 10 10 2.5 5 Inductive 5 8 8 8 2.5 5 Motor 4 4 4 2 2 Lamp 2 2 - - - Overload 40 60 60 N/A N/A Rupture 50 80 80 N/A N/A AMERICAS EUROPE ASIA 6900 Orangethorpe Ave. 2 Rue Goethe Units 602-603 6/F Lakeside 1 P.O. Box 5032 57430 Sarralbe No.8 Science Park West Avenue Buena Park, CA 90622 France Phase Two, Hong Kong Science Park Featuring LEACH power and control solutions Pak Shek Kok, Tai Po, N.T . Hong Kong www.esterline.com Tel: (01) 714-736-7599 Tel: (33) 3 87 97 31 01 Tel: (852) 2 191 3830 Fax: (01) 714-670-1145 Fax: (33) 3 87 97 96 86 Fax: (852) 2 389 5803 Data sheets are for initial product selection and comparison. Contact Esterline Power Systems prior to choosing a component. Date of issue: 07/10 - 89 - Page 1 of 4 COIL CHARACTERISTICS (Vac) SERIES JA Vac 400 Hz Vac 50 thru Vac 400 Hz 400 Hz 6 CODE E F J K T Nominal operating voltage 28 115 28 115 230 Maximum operating voltage 30 122 30 122 248 Maximum pickup voltage - Cold coil at +125 C 22 90 23 95 180 - During high temp test at +125 C 24.4 95.4 24.6 100 185 - During continuous current test at +125 C 25.6 103.5 25.9 105 195 Maximum drop-out voltage 10 30 10 30 60 Coil current max milliAmperes at +25 C 240 40 100 24 22 GENERAL CHARACTERISTICS Temperature range -70C to +125C Minimum operating cycles (life) at rated load 100,000 Minimum operating cycles (life) at 25% rated load 400,000 Dielectric strength at sea level - All circuits to ground and circuit to circuit 1250 Vrms - Coil to ground 1000 Vrms Dielectric strength at altitude 80,000 ft 500 Vrms 2 Insulation resistance - Initial (500 Vdc) 100 M min - After environmental tests (500 Vdc) 50 M min Sinusoidal vibration (A, D and J mounting) 0.12DA / 10 to 70 Hz 30G / 70 to 3000 Hz Sinusoidal vibration (G mounting) 0.12DA / 10 to 57 Hz 20G /57 to 3000 Hz Random vibration - Applicable specification MIL-STD-202 - Method 214 2 - Test condition - A, D and J mounting 1G (0.4G /Hz, 50 to 2000 Hz) 2 - Test condition - G mounting (E in track) 1E (0.2G /Hz, 50 to 2000 Hz) - Duration 15 minutes each plane Shock (A, D and J mounting) 200G / 6 ms Shock (G mounting) 100G / 6 ms Maximum contact opening time under vibration and shock 10 s Operate time at nominal voltage 25C 15 ms max Release time at nominal voltage 25C 50 ms max Contact make bounce at nominal voltage 25C 1 ms max Contact release break bounce at nominal voltage 25C 0.1 ms max Weight maximum 0.088lb Unless otherwise noted, the specified temperature range applies to all relay characteristics. Date of issue: 07/10 - 90 - Page 2 of 4