SERIES JL ENGINEERING DATA SHEET RELAY - LATCH 2 PDT, 12 AMP Magnetic latch operation All welded construction Contact arrangement 2 PDT Designed to the performance standards of MIL-PRF-83536 PRINCIPLE TECHNICAL CHARACTERISTICS Contacts rated at 28 Vdc 115 Vac, 400 Hz, 1 and 115/200 Vac, 400 Hz 3 Weight 0.088lb max 1.01in x .51in x 1.00in Dimensions Detail specifications and ordering data appear on the following APPLICATION NOTES: pages. 101 102 103D 007 023 APPLICABLE SOCKET: SO-1055-8690/10147 CONTACT ELECTRICAL CHARACTERISTICS Contact rating Load current in Amps per pole and load 28 Vdc 115 Vac 115/200 Vac, 400 Hz, 3 115/200 Vac, 60 Hz, 3 6 type 1 400 Hz Resistive 12 12 12 2.5 Inductive 5 8 8 8 2.5 Motor 4 4 4 2 Lamp 2 2 2 1 Overload 40 60 60 N/A Rupture 50 80 80 N/A AMERICAS EUROPE ASIA 6900 Orangethorpe Ave. 2 Rue Goethe Units 602-603 6/F Lakeside 1 P.O. Box 5032 57430 Sarralbe No.8 Science Park West Avenue Buena Park, CA 90622 France Phase Two, Hong Kong Science Park Featuring LEACH power and control solutions Pak Shek Kok, Tai Po, N.T . Hong Kong www.esterline.com Tel: (01) 714-736-7599 Tel: (33) 3 87 97 31 01 Tel: (852) 2 191 3830 Fax: (01) 714-670-1145 Fax: (33) 3 87 97 96 86 Fax: (852) 2 389 5803 Data sheets are for initial product selection and comparison. Contact Esterline Power Systems prior to choosing a component. Date of issue: 07/10 - 113 - Page 1 of 4 COIL CHARACTERISTICS (Vdc) SERIES JL CODE A B C M N 7 R 7 V 7 Nominal operating voltage 28 12 6 48 28 12 6 Maximum operating voltage 29 14.5 7.3 50 29 14.5 7.3 Maximum pickup voltage - Cold coil at +125 C 18 9 4.5 36 18 9 4.5 - During high temp test at +125 C 19.8 9.9 5 38 19.8 9.9 5 - During continuous current test at +125 C 22.5 11.25 5.7 42 22.5 11.25 5.7 600 150 38 1600 600 150 38 Coil resistance 10% +25 C except types & +20%, -10% GENERAL CHARACTERISTICS Temperature range -70C to +125C Minimum operating cycles (life) at rated load 100,000 Minimum operating cycles (life) at 25% rated load 400,000 Dielectric strength at sea level - All circuits to ground and circuit to circuit 1250 Vrms - Coil to ground and coil to coil 1000 Vrms Dielectric strength at altitude 80,000 ft 500 Vrms 2 Insulation resistance - Initial (500 Vdc) 100 M min - After environmental tests (500 Vdc) 50 M min Sinusoidal vibration (A, D and J mounting) 0.12DA / 10 to 70 Hz 30G / 70 to 3000 Hz Sinusoidal vibration (G mounting) 0.12DA / 10 to 57 Hz 20G /57 to 3000 Hz Random vibration - Applicable specification MIL-STD-202 - Method 214 2 - Test condition - A, D and J mounting 1G (0.4G /Hz, 50 to 2000 Hz) 2 - Test condition - G mounting 1E (0.2G /Hz, 50 to 2000 Hz) - Duration 15 minutes each plane Shock (A, D and J mounting) 200G / 6 ms Shock (G mounting) 100G / 6 ms Maximum contact opening time under vibration and shock 25C 10 s Operate time at nominal voltage (either coil) 25C 10 ms max Contact make bounce at nominal voltage 25C 1 ms max Weight maximum 0.088lb Date of issue: 07/10 - 114 - Page 2 of 4