APHC-03502-MT European Thermodynamics

APHC-03502-MT Peltier cooler module Data sheet Imax A 1.8 Vmax Vdc 4.4 Pc max W 5.2 ACR 2.1 Tmax C 64 A mm 8.8 A1 mm 8.8 B mm 11 H mm 2.16 L mm 100 Wire AWG 28 o Pretinned metallised surface with 118 C solder o Assembled with 138 C solder (At hot side temperature Th = 25C / 298K, under dry N ) 2 Pc max = Cooling power at T = 0 and I = Imax Tmax = Temperature difference at I = Imax and Pc = 0 Max hot side temperature Th = 80C for best long term performance Max mounting pressure: 1.5MPa Wires: UL-style 1569, 105oC (Unstripped) Adaptive is a registered trademark of European Thermodynamics Limited. Web: www.etdyn.com Tel: +44(0)116 279 6899 E-mail: info etdyn.com APHC-03502-MT Peltier cooler module Features Both sides are metallised RoHs and Reach 161 compliant Solid-state reliability High integrity nickel diffusion barriers on elements High strength for rugged environments Porched style for enhanced leadwire strength Sealed & lapped for multi-module applications Installation Recommended mounting methods: Bonding with thermal or epoxy or soldering with metallised ceramics. For further information, please visit adaptivete.com or e-mail info etdyn.com for technical support. Operation cautions o For maximum reliability, storage and operation - a temperature below 85 C in a non-condensing environment is recommended. To minimise thermal stress, use a linear/proportional temperature control or a similar method rather than an on/off method. Adaptive is a registered trademark of European Thermodynamics Limited. Web: www.etdyn.com Tel: +44(0)116 279 6899 E-mail: info etdyn.com