10.000MHZ XO91050UITA Euroquartz

QUARTZ EURO XO91 Series Oscillators 7 x 5mm SMD HCMOS Miniature 7.0 x 5.0 x 1.4mm hermetically-sealed package Frequency Range 500kHz to 125MHz Page 1 of 2 Tristate (Enable/Disable) function as standard Supply voltage range 1.8, 2.5, 3.3 or 5.0 Volts DESCRIPTION OUTLINE & DIMENSIONS XO91miniature oscillators consist of a TTL/CMOS-compatible hybrid circuit together with a miniature quartz crystal packaged in a low- profile, industry-standard ceramic package. The high quality design and materials employed provide a highly reliable clock oscillator in a miniature package while mass production methods ensure that the XO91 provides a cost-effective oscillator solution. SPECIFICATION Frequency Range: 500kHz to 125.0MHz Supply Voltage: 1.8, 2.5, 3.3 or 5.0 Volts 10% Output Logic: HCMOS/LSTTL Frequency Stability* Temperature Range Stability 0 to +50C: from 10ppm -20 to +70C: from 15ppm -40 to +85C: from 25ppm -55 to +105C: from 100ppm Rise/Fall Time: see table Output Voltage: HIGH 1: 90%Vdd minimum LOW 0: 10%Vdd maximum Output Load CMOS: 15pF (50pF available) TTL: 10 LSTTL loads Duty Cycle: 50%5% typical Supply Current: See table Operating Temperature 0~50C (Light Commercial) 0~70C (Commercial) -40~+85 (Industrial) -55~+105C (Military) Storage Temperature: -55~+105C Startup Time 500kHz to 32MHz: 5ms max. SOLDER TEMPERATURE PROFILE 32MHz+ to 125MHz: 10ms max. (to reach 90% amplitude at 252C) Ageing: 5ppm max. In first year Phase Jitter RMS: <1ps typical Enable Time: 100ms max. Disable Time: 100ns max. Tristate Function (Pad 1): Output (Pad 3) is active if Pad 1 is not connected or a voltage to Pad 1 is HIGH . Output is high impedance when LOW or GROUND is applied to Pad 1. * Frequency stability is inclusive of calibration tolerance at 25C, frequency change due to shock & vibration, 10 supply voltage variation and stability over temperature range. Note: Parameters are measured at ambient temperature of 25C, supply voltage as stated and a load of 15pF CURRENT CONSUMPTION & RISE/FALL TIME Supply Voltage (10%) Frequency Range Rise/Fall +1.8V +2.5V +3.3V +5.0V Time 500kHz to 32MHz 8mA 10mA 15mA 25mA 4ns max. 10mA 14mA 16.5mA 35mA 3ns max. 32MHz+ to 50MHz 40MHz+ to 125MHz 25mA 30mA 35mA 40mA 2ns max. EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: info euroquartz.co.uk www.euroquartz.co.ukQUARTZ EURO XO91 Series Oscillators 7 x 5mm SMD HCMOS Page 2 of 2 ENVIRONMENTAL PERFORMANCE SPECIFICATION PART NUMBERING Example: 16.000MHz XO91050UCTA RoHS Status: Compliant Storage Temperature Range: -50 to +100C Frequency Humidity: 85% RH, 85C for 48 hours Series Designation XO91 -8 3 Hermetic Seal: Leak rate 2x10 ATM -cm /s max. Stability* Solderability: MIL-STD-202F Method 208E 100 = 100ppm Reflow: 260C for 10 sec (see diagram) 50 = 50ppm Vibration: MIL-STD-202F Method 204, 35g, 25 = 25ppm 50 to 2000Hz Output Universal Shock: MIL-STD-202F Method 213B, test Operating Temp. Range Condition E, 1000g sinewave C = 0+70C D = -20~+70C I = -40~+85C M = -55~+105C Tristate Function Supply Voltage Blank = 5.0 Volts A = 3.3 Volts B = 2.5 Volts C = 1.8 Volts * For other stability requirements enter figure required. EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: info euroquartz.co.uk www.euroquartz.co.uk