SMD B 25-21/R6C-BR2S2B/2A Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself will remain within RoHS compliant version. Compliance with EU REACH. Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm). Description The 25-21 SMD LED is much smaller than lead frame type components, thus enable smaller board ize, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. 1 Copyright 2010, Everlight All Rights Reserved. Release Date :Sep.17.2020 Issue No: DSE-0017457 Rev.3 www.everlight.com Ver.:3 Release Date:09/29/2020 :Approved() DATASHEET SMD REFLECTOR 25-21/R6C-BR2S2B/2A Device Selection Guide Chip Emitted Color Resin Color Materials AlGaInP Brilliant Red Water Clear Absolute Maximum Ratings (Ta=25 ) Parameter Symbol Rating Unit 5 Reverse Voltage V V R 25 Forward Current IF mA Peak Forward Current 60 I mA FP (Duty 1/10 1KHz) 60 Power Dissipation Pd mW -40 ~ +85 Operating Temperature T opr -40 ~ +90 Storage Temperature Tstg 2000 Electrostatic Discharge ESD V HBM Reflow Soldering : 260 for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 for 3 sec. Electro-Optical Characteristics (Ta=25 ) Parameter Symbol Min. Typ. Max. Unit Condition Iv mcd Luminous Intensity 140 ----- 285 2 deg 1/2 Viewing Angle ----- 60 ----- p nm Peak Wavelength ----- 632 ----- IF=20mA d nm Dominant Wavelength 617.5 ----- 629.5 nm Spectrum Radiation Bandwidth ----- 20 ----- V Forward Voltage V F 1.75 ----- 2.35 I A V =5V R R Reverse Current ----- ----- 10 Note: 1. Tolerance of Luminous Intensity: 11% 2. Tolerance of Dominant Wavelength: 1nm 3.Tolerance of Forward Voltage: 0.1V 4.Reverse Voltage(VR) Condition is applied to IR test only The device is not designed for reverse operation 2 Copyright 2010, Everlight All Rights Reserved. Release Date :Sep.17.2020 Issue No: DSE-0017457 Rev.3 www.everlight.com Ver.:3 Release Date:09/29/2020 :Approved()