CNY64, CNY65, CNY66
Vishay Semiconductors
Optocoupler, Phototransistor Output, Very High Isolation Voltage
FEATURES
Top View Rated recurring peak voltage (repetitive)
A C V = 1450 V
IORM peak
CNY64
Thickness through insulation 3 mm
Creepage current resistance according to
VDE 0303/IEC 60112 comparative tracking
index: CTI 200
CNY65
Compliant to RoHS Directive 2002/95/EC and in
C E
accordance to WEEE 2002/96/EC
V
DE
APPLICATIONS
Circuits for safe protective separation against electrical
shock according to safety class II (reinforced isolation):
17187-5
CNY66
for appl. class I - IV at mains voltage 300 V
17187-4
for appl. class I - IV at mains voltage 600 V
DESCRIPTION
for appl. class I - III at mains voltage 1000 V according
The CNY64, CNY65, and CNY66 consist of a
to DIN EN 60747-5-2 (VDE 0884), suitable for:
phototransistor optically coupled to a gallium arsenide
- Switch-mode power supplies
infrared-emitting diode in a 4 pin plastic package.
The single components are mounted opposite one another,
- Line receiver
providing a distance between input and output for highest
- Computer peripheral interface
safety requirements of > 3 mm.
- Microprocessor system interface
VDE STANDARDS
AGENCY APPROVALS
These couplers perform safety functions according to the
UL1577, file no. E76222 system code H, J, and K
following equipment standards:
DIN EN 60747-5-2 (VDE 0884)
DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5
Optocoupler for electrical safety requirements
(pending), available with option 1
IEC 60950/EN 60950
VDE related features:
Office machines
- rated impulse voltage (transient overvoltage),
VDE 0804
V = 12 kV peak
Telecommunication apparatus and data processing
IOTM
- isolation test voltage (partial discharge test voltage),
IEC60065
Safety for mains-operated electronic and related
V = 2.8 kV peak
pd
household apparatus
VDE 0700/IEC 60335
Household equipment
VDE 0160
Electronic equipment for electrical power installation
VDE 0750/IEC60601
Medical equipment
ORDERING INFORMATION
DIP, 400 mil DIP, 600 mil DIP, 700 mil
CN Y 6 # x
PART NUMBER PACKAGE CTR
17.8 mm
10.16 mm 15.24 mm
OPTION BIN
AGENCY CERTIFIED/PACKAGE CTR (%)
UL, VDE 50 to 300 63 to 125 100 to 200
DIP-4 HV, 400 mil, high isolation distance CNY64 CNY64A CNY64B
DIP-4 HV, 600 mil, high isolation distance CNY65 CNY65A CNY65B
DIP-4 HV, 700 mil, high isolation distance CNY66 - CNY66B
Document Number: 83540 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com
Rev. 2.1, 24-Feb-11 1
CNY64, CNY65, CNY66
Optocoupler, Phototransistor Output,
Vishay Semiconductors
Very High Isolation Voltage
ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified)
amb
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
INPUT
Reverse voltage V 5V
R
Forward current I 75 mA
F
Forward surge current t 10 s I 1.5 A
p FSM
Power dissipation P 120 mW
diss
Junction temperature T 100 C
j
OUTPUT
Collector emitter voltage V 32 V
CEO
Emitter collector voltage V 7V
ECO
Collector current I 50 mA
C
Collector peak current t /T = 0.5, t 10 ms I 100 mA
p p CM
Power dissipation P 130 mW
diss
Junction temperature T 100 C
j
COUPLER
AC isolation test voltage CNY64 t = 1 min V 8200 V
ISO RMS
DC isolation test voltage CNY65 t = 1 s V 13.9 kV
ISO
DC isolation test voltage CNY66 t = 1 s V 13.9 kV
ISO
Total power dissipation P 250 mW
tot
Ambient temperature range T - 55 to + 85 C
amb
Storage temperature range T - 55 to + 100 C
stg
Soldering temperature 2 mm from case, 10 s T 260 C
sld
Note
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified)
amb
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
INPUT
Forward voltage I = 50 mA V 1.25 1.6 V
F F
Junction capacitance V = 0, f = 1 MHz C 50 pF
R j
OUTPUT
Collector emitter voltage I = 1 mA V 32 V
C CEO
Emitter collector voltage I = 100 A V7V
E ECO
Collector emitter leakage current V = 20 V, I = 0 A I 200 nA
CE F CEO
COUPLER
Collector emitter saturation voltage I = 10 mA, I = 1 mA V 0.3 V
F C CEsat
V = 5 V, I = 10 mA,
CE F
Cut-off frequency f 110 kHz
c
R = 100
L
Coupling capacitance f = 1 MHz C 0.3 pF
k
Note
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
www.vishay.com For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83540
2 Rev. 2.1, 24-Feb-11