BIS-412I 230V F&F

Functioning F&F Filipowski sp. j. Konstantynowska 79/81 95-200 Pabianice The relay power supply is indicated by a green LED. phone/fax: (+48 42) 215 23 83 / 227 09 71 POLAND Local control L N 1 2 3 1 2 3 1 2 3 4 5 6 4 5 6 4 5 6 U U U P1 P2 P3 CENTRAL CONTROL BIS-412 BIS-412 BIS-412 7 8 9 7 8 9 7 8 9 10 11 12 10 11 12 10 11 12 Group scheme P1 P2 P3 P2 P1 P2 P2 P1 P2 P3 Diagram - 5 - - 6 - Assembly Technical data 1. Turn OFF the power. power supply 100265V AC 2. Put on the relay on the rail in the switchgear box. contact separated 1NO current load (AC-1) <16A (160A/20ms) control pulse 180265 V AC <20mA Do not install a device, that is damaged or incomplete. max current control buttons 5mA activation delay 0.10.2sec 3. Connect the power cable to contact 1-3 with marks. power indication green LED signalling activation red LED power consumption standby 0.15W Group of relays working with a common central control must on 0.6W be powered by the same line, e.g. L1 only . working temperature -2550C 2 terminal 2.5mm screw terminals tightening torque 0.4Nm Exercise extreme caution when installing the controller. dimensions 1 module (18mm) Improper connection may damage the controller or connec- mounting on TH-35 rail ted devices. ingress protection IP20 4. Connect both local and central control switches accordingly to the termi- nals of the relay in accordance with the function and to the common N wire. Connecting various N line to the control inputs of the relays may cause improper operation of the system and lead to the destruction of the controllers. 5. Connect in series the contact of the relay into the power supply circuit of the controlled receiver (lighting). Connect power supply to terminal 7 controlled receiver power between contact 10 and N wire. 6. Turn on the power supply. - 7 - D150203 - 8 -