Fair-Rite offers a broad selection of cost effective multi-layer chip beads to suppress conducted EMI signals. Chip beads can be used in an array of devices such as cellular phones, computers, laptops, pagers, etc. The small package sizes accommodate automated placements and allow for a dense packaging of circuit boards. Chip beads are 100% tested for impedance and dc resistance. They are available in standard, high and GHz signal speeds. The multi-layer chip beads are organized by increasing package size and current carrying capacity. All multi-layer chip beads are supplied taped and reeled, if required bulk packed chip beads can be provided. The impedance values listed are typical values. The nominal impedance with a +/- 25% tolerance is specified for the + marked 100 MHz. Chip beads are measured for impedance on the HP 4291A and fixture HP 16192A. Chip beads have plated contacts, 100% matte tin over a nickel undercoating. They can accommodate both reflow and wave soldering technologies. The suggested land patterns are in accordance to the latest revision of IPC-7351. o o Recommended storage and operating temperature range is -55 C to 125 C. Performance curves for these suppression components are our web site. Our Chip Bead Kit (part number 0199000018) is available for prototype evaluation. Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 Fax: (888) FERRITE / (845) 895-2629 Web: www.fair-rite.com 58 (888) 324-7748 (888) 337-7483 E -mail: ferrites fair-rite.com Fair-Rite Products Corp. PO Box 288, One Commercial Row, Wallkill, NY 12589-0288 Phone: (888) FAIR RITE / (845) 895-2055 Fax: (888) FERRITE / (845) 895-2629 Web: www.fair-rite.com 59 (888) 324-7748 (888) 337-7483 E -mail: ferrites fair-rite.com