SL101N Fisnar

Dispensers Quick Start Guide 1. Introduction Dear Customer Thank you for your purchase in TME To protect the environment we have prepared for you this quick start guide. Before operating the unit, please read it carefully. Please visit www.tme.eu Illustrations in this manual are only example images and may differ from the actual item. It does not change their main characteristics. 2. Application This device is designed for chemicals dispensing. 3. Unit setup and operation C - Pressure meter R - Pressure controller T - Timer controller W - Power on switch Z - Timer/Manual control mode switch V - Underpressure button P - Foot pedal S - Dosing syringe Place the device on a stable surface. Connect the power cord, air hose, dispensing nozzle and the foot pedal into the correct sockets. Fill the nozzle with the required substance. Turn on the power. Set the desired pressure and time. 1/24. Precautions Do not turn on the unit immediately after moving it from a cold to a warm room. Condensation may damage the device. Damaged power cord must be immediately replaced by a qualified technician. Do not cover the ventilation holes. Never operate the unit with wet hands or when wires are wet as this could cause a short circuit or electric shock. Use the proper protective clothing. The unit should be kept out of reach of children. Do not use the dispenser for dispensing substances other than soldering. After finishing work, turn off the power and unplug the power cord. It is forbidden to make any construction modifications to the device. Unauthorised construction modifications will result in loss of warranty, and may also cause a malfunction or an accident. Worn electrical equipment can not be disposed of with othe household waste. Worn electrical equipment must be stored in places designated for that. 2/2