Ericsson Internal E TABLE OF CONTENTS 1 (1) Prepared (also subject responsible if other) No. SEC/S Stella Song 001 52-EN/LZT 146 434 Uen Technical Specication Approved Checked Date Rev Reference EN/LZT 146 436 R3A Oct 2012 BMR 46 2 series PoL Regulators 2012-09-26 D D Ericsson AB Input 4.5-14 V, Output up to 12 A / 60 W Key Features Small package Laydown: 21.0 x 12.7 x 8.2 mm (0.827 x 0.5 x 0.323 in) SIP: 20.8 x 7.6 x 15.6 mm (0.82 x 0.3 x 0.612 in) 0.6 V - 5.0 V output voltage range High efficiency, typ. 97.1% at 5Vin, 3.3Vout half load Configuration and Monitoring via PMBus Synchonization & phase spreading Voltage Tracking & Voltage margining MTBF 21.2 Mh General Characteristics Fully regulated For narrow board pitch applications (15 mm/0.6 in) Non-Linear Response for reduction of decoupling cap. Input under voltage shutdown Over temperature protection Safety Approvals Design for Environment Output short-circuit & Output over voltage protection Remote control & Power Good Voltage setting via pin-strap or PMBus Advanced Configurable via Graphical Meets requirements in high- Used Interface temperature lead-free soldering ISO 9001/14001 certified supplier processes. Highly automated manufacturing ensures quality Contents Ordering Information .............................................................2 General Information .............................................................2 Safety Specification .............................................................3 Absolute Maximum Ratings ............................................................. 4 Electrical Specification 12A/ 0.6-5V Lay Down version and Power Good option BMR4620002 (TH) BMR4621002 (SMD) BMR4620006 (TH) BMR4621006 (SMD) ............................ 5 12A/ 0.6-5V Single in Line version (SIP) BMR4622002...................................... 13 EMC Specification ...........................................................21 Operating Information ...........................................................21 Thermal Consideration ...........................................................30 Connections ...........................................................31 Mechanical Information ...........................................................40 Soldering Information ...........................................................43 Delivery Information ...........................................................44 Product Qualification Specification ...........................................................46 E 2 Technical Specication EN/LZT 146 436 R3A Oct 2012 BMR 46 2 series PoL Regulators Ericsson AB Input 4.5-14 V, Output up to 12 A / 60 W Compatibility with RoHS requirements Ordering Information The products are compatible with the relevant clauses and Product program Output requirements of the RoHS directive 2002/95/EC and have a BMR 462 0.6-5.0 V, 12 A / 60 W maximum concentration value of 0.1% by weight in homogeneous materials for lead, mercury, hexavalent Product number and Packaging chromium, PBB and PBDE and of 0.01% by weight in BMR 462 n n n n /n n n n 1 2 3 4 5 6 7 8 homogeneous materials for cadmium. Options n n n n / n n n n 1 2 3 4 5 6 7 8 Mounting / Exemptions in the RoHS directive utilized in Ericsson Power Modules products are found in the Statement of Mechanical / Compliance document. Digital interface / Configuration file / Ericsson Power Modules fulfills and will continuously fulfill Packaging / all its obligations under regulation (EC) No 1907/2006 concerning the registration, evaluation, authorization and restriction of chemicals (REACH) as they enter into force Options Description and is through product materials declarations preparing for n 0 Through hole mount version (TH) 1 the obligations to communicate information on substances 1 Surface mount version (SMD) in the products. 2 Single in line (SIP) Quality Statement n 0 Open frame 2 The products are designed and manufactured in an n n 02 PMBus and analog pin strap, with 3 4 industrial environment where quality systems and methods Voltage Tracking Pin (Pin 4A) like ISO 9000, Six Sigma, and SPC are intensively in use to 06* PMBus and analog pin strap, with Power boost the continuous improvements strategy. Infant Good Pin (Pin 4A) mortality or early failures in the products are screened out and they are subjected to an ATE-based final test. n n n 001 Standard configuration 5 6 7 002 Negative logic Conservative design rules, design reviews and product qualifications, plus the high competence of an engaged n B Antistatic tray of 100 products (SIP only) 8 work force, contribute to the high quality of the products. C Antistatic tape & reel of 200 products (Sample delivery avalable in lower Warranty quantities. Not for SIP) Warranty period and conditions are defined in Ericsson Example: Product number BMR 462 0002/001C equals a through-hole mounted, open frame, PMBus and analog pin strap, voltage tracking pin at Power Modules General Terms and Conditions of Sale. 4A, positive RC logic, standard configuration variant, package tape&reel Limitation of Liability Note*: Only available on Lay-down series. General Information Ericsson Power Modules does not make any other warranties, expressed or implied including any warranty of Reliability merchantability or fitness for a particular purpose The failure rate () and mean time between failures (including, but not limited to, use in life support (MTBF= 1/ ) is calculated at max output power and an applications, where malfunctions of product can cause operating ambient temperature (T ) of +40C. Ericsson A injury to a persons health or life). Power Modules uses Telcordia SR-332 Issue 2 Method 1 to calculate the mean steady-state failure rate and standard Ericsson AB 2012 deviation ( ). The information and specifications in this technical specification is believed to be correct at the time of Telcordia SR-332 Issue 2 also provides techniques to publication. However, no liability is accepted for estimate the upper confidence levels of failure rates based inaccuracies, printing errors or for any consequences on the mean and standard deviation. thereof. Ericsson AB reserves the right to change the contents of this technical specification at any time without prior notice. Mean steady-state failure rate, Std. deviation, 47 nFailures/h 12.4 nFailures/h MTBF (mean value) for the BMR 462 series = 21.2 Mh. MTBF at 90% confidence level = 15.9 Mh