FLUKE-700HTH-1 Fluke

Manual Supplement Manual Title: 74X Series Calibration Supplement Issue: 3 Part Number: 602505 Issue Date: 10/09 Print Date: February 1997 Page Count: 6 Revision/Date: 2, 4/99 This supplement contains information necessary to ensure the accuracy of the above manual. 2006-2009 Fluke Corporation. All rights reserved. Printed in U.S.A. x 74X Series Calibration Manual Supplement Change 1, 45265 On page 6, replace the bottom portion of the Frequency Sourcing table with the following: Waveform Choices: Zero-symmetric sine or positive square wave, 50 % duty cycle. Amplitude: 0.1 to 10 V pk (square wave, 0 V reference) 0.1 to 10 V p-p (sinewave) Amplitude Accuracy: S/N 9095999 or earlier: 0 Hz to 1099 Hz: 3 % of output + 0.5 % f.s. 1.1 kHz to 10.9 kHz: 10 % of output + 0.5 % f.s. 11 kHz to 50 kHz: 30 % of output + 0.5 % f.s. Amplitude Accuracy: S/N 9096000 or later: 0 Hz to 50 kHz: 30 % of output + 0.5 % f.s. Maximum Input Voltage: 30 V dc Under Temperature, Thermocouples Type E, delete the entire third row. On page 22, replace Table 12 with the following: Table 12. Frequency Source Verification Points S/N 9095999 or earlier: S/N 9096000 or later: UUT Frequency Minimum Maximum Amplitude Tolerance Amplitude Tolerance Range 1 Vpp Freq. Freq. mV peak mV RMS mV peak mV RMS 10.999 Hz 5 Hz 4.99 5.01 80 40 350 175 109.99 Hz 50 Hz 49.9 50.1 80 40 350 175 1099.9 Hz 500 Hz 499.9 500.1 80 40 350 175 21.999 kHz 10 kHz 9.998 10.002 150 75 350 175 50 kHz 50 kHz 49.995 50.005 350 175 350 175 Sine Wave 1099.9 Hz 999.9 1000.1 80 28.29 350 123.74 1000 Hz 1/08 1