FLUKE-714B/EN Fluke

Fluke 712B and 714B Temperature Calibrators Accuracy and Simplicity Technical Data Product Highlights For the temperature calibration professional that wants a The 712B can measure and simulate (13) different RTD highly accurate, easy-to-use, single function temperature types and resistance calibrator the 712B and 714B are ideal test tools. The 714B can measure and simulate (17) different thermocouple types and millivolts Measure 4 to 20 mA signals while simultaneously sourcing a temperature signal Hanging tool designed in and included with every unit Configurable 0 % and 100 % source settings for quick 25 % linearity checks Linear ramp and 25 % step auto ramp based on 0 % and 100 % settings Dual inputs and backlit display for easy interpretation of measurements Power down settings remembered at power up for easy restart of tests 1-year and 2-year specifications and traceable certificate of calibrationSpecifications Specifications are based on a one year calibration cycle and apply from +18 C to +28 C unless stated otherwise. All specifications assume a 5-minute warmup period. General specifications Ohms measurement (Fluke 712B) Maximum voltage applied 30 V between any terminal and Ohms range Accuracy earth ground or between (% of reading +counts) any two terminals: 0.00 to 400.00 0.015 % + 0.05 Operating temperature -10 C to 50 C 400.0 to 4000.0 0.015 % + 0.5 Storage temperature - 30 C to 60 C Note: Read accuracy is based on 4-wire input. For 3-wire ohm measurements, assuming all three leads are matched, add 0.05 (0.00 ~400.00 ), Operating altitude 2,000 meters 0.2 (400.0 ~4000.0 ) to the specifications. Storage altitude 12,000 meters Temperature coefficient: (0.002 % of reading + 0.002 % of range) /C ( <18 C or >28 C) Relative humidity Non condensing (% RH operating without 90 % (10 C to 30 C) condensation) 75 % (30 C to 40 C) Millivolt measurement and source (Fluke 714B) 45 % (40 C to 50 C) Resolution Range Accuracy (Without condensation) (% of reading Vibration requirements MIL-T-28800E, Class 2 +counts) Drop text requirements 1 meter -10 mV to 75 mV 0.01 mV 0.015 % + 10 A IP Rating IEC 60529: IP52 Temperature coefficient: (0.002 % of reading + 0.002 % of range) /C ( <18 C or >28 C) Electromagnetic IEC 61326-1, Portable environment Safety IEC 61010-1, Max 30 V to Ohms source (Fluke 712B) earth, Pollution Degree 2 Ohms range Excitation Accuracy Power supply 4 AA NEDA 1.5A IEC LR6 current from (% of reading batteries measurement + counts) device Size (H x W x L) 52.5 mm x 84 mm x 188.5 mm 1.0 to 400.0 0.1 mA to 0.5 mA 0.015 % + 0.1 Weight 515 g 1.00 to 400.00 0.5 mA to 3 mA 0.015 % + 0.05 400.0 to 1500.0 0.05 mA to 0.8 mA 0.015 % + 0.5 1500.0 to 4000.0 0.05 mA to 0.4 mA 0.015 % + 0.5 DC mA measurement Resolution Resolution Range Accuracy (% of reading 0.00 to 400.00 0.01 + counts) 400.0 to 4000.0 0.1 0-24 mA 0.001 mA 0.010 % + 2 A Temperature coefficient: (0.002 % of reading + 0.002 % of range) /C ( <18 C or >28 C) Temperature coefficient: (0.002 % of reading + 0.002 % of range) /C ( <18 C or >28 C) Supports pulsed transmitters and PLCs with pulse times as short as 5 ms 2 Fluke Corporation Fluke 71XB Temperature Calibrators